IU 410 is for the C450
Type: Posts; User: racosta
IU 410 is for the C450
Try all zeros or administrator.
Hey Hemlock... Unfortunally the C6500 is a completely different beast than the C250.
Hello Solotime. To answer your question it will do a watermark on it but it will only do it on print jobs. You have to look in the print driver under edit watermark. Unfortunally it wont do it in...
Hey guys I just want to say thanks again for all your input on my problem. Well here is an update. This was a chargable call but good thing the machine was less than a year old, so KM warrantied the...
Well sounds like a fax issue for sure. First thing I would do is have them do a po/po. then check their fax line for noise and make sure that someone...ie the customer lol. didn't plug the fax line...
OK..... After you press (3) enter all zeros in the field then push end. That should give you thr option for the Trouble Reset.
What do you mean cold reset 3-7? Either way give this a shot. Try going into Initial mode. Here is the procedure.
1. Press the Warm Restart bitton on the right side of the control panel. ( small pin...
Brent you are so rite! Xmasvn if it is a NEC version of this box there are two ways to enter service mode. FIRST WAY...... Utility, Access, press * (asterisk) 4 times, Utility, Utility , Maintance...
The default password is 12345678. It is wise not to change this password.
Sorry I missed a step there for you. Try this........
Yes Brent is correct First step is press Utility then meter count then stop 00 top 0 1 then when the window opens enter all zeros then you should be in service mode.
11.3.4 CE Authentication
• It will not be displayed when the following settings are set to “ON”.
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode] or [Password
Rules].
...
Try these steps....Hope this helps....
11.3 Settings in the Enhanced Security
11.3.1 CE Password
11.3.2 Administrator Password
Functions • To set and change the CE password.
Use • Use...
Yes it is "Stop 00 Stop O 1" and then all zeros. That should get you into tech rep mode.
OH OH, That is not a good code.
16. Malfunction code Field Service Ver. 1.0 Jul. 2005
344
Troubleshooting
bizhub C250
Here is what the code means and what to check for.
Field Service Ver. 1.0 Jul. 2005 16. Malfunction code
367
Troubleshooting bizhub C250
16.5.46 C4551: Laser malfunction (Cyan)
16.5.47...
I had to replace the hook once myself so I knew exactlly where to look for it. Glad I could help you out.
AD-503 Accessories parts manual for the C250. Part number is 4066-3765-02 (hook). Hope this helps you.
Also If you take off the duplexer you should be able to find the cable that attaches to the...
Well If it's happening when copying also it just might be a bad pwb. But just to be safe I would try to reseat all the connections and maybe even try firmware upgrade.
I would try reinstalling your driver and checking your cables before replacing any pwb's. Just to be sure that it is not the board.
Utility/meter, check details, stop - 0 - 0- stop -0- 1, then in the small window all zeros enter.
Hey there Taylor. If I'm reading this correctly you preformed a total clear on the machine in service mode and now you can't print to it? If thats the case well then you have to go into admin mode...
Do you mean sc21-01? If so pull out the drum cart and check your charge unit. And then try a touble reset
Thanks Stirton.M for your input. I won't be going back out to that call till Thursday but Yes about a month ago we checked the outlet and found that it was dropping while in use. We did put a surge...