When printing on a 11" vs 14"...what if any are the differences? Paper is longer....but does timing change, voltage, etc. something that would cause the image to fail..
Also I changed the laser...
Type: Posts; User: landspeeder
When printing on a 11" vs 14"...what if any are the differences? Paper is longer....but does timing change, voltage, etc. something that would cause the image to fail..
Also I changed the laser...
No diff. also I made a mistake in my original post......8 by 11.5" is the only one that prints good....14" and 11 by 17" suck.......almost blank
[QUOTE=teckat;480142]29831
29832
How were these copies made ????[/QUOTE
The paper type is set as plain....the drum was changed about 2 yrs ago. and it was about $1500. so I cant swap it to see what happins...no Christmas bonus for the next 10yrs. if I did that.....
I am...
I have a I/R 7105 under contract that when coping or printing from any paper source and using 8.5 by 11 paper copies/prints its almost perfect.
When using 14" paper there is a void band going across...
how much for the software?
have to go on site Tuesday...havent seen it yet and never worked on this model before...is the software built in for a reload or is it a have to buy thing?
"network controller unavailable" on the machines display
its the mirrors being out...turn all screws until they cant turn any further then go to the other end and count the clicks...then divide the total clicks and go to the middle..then run the test..and...
I have a client that is getting this error...he's checked power ,connections etc. with no difference. Is there any sure thing to resolve this issue or a good work around? Seems to be a common...
this happins when just pushing the print key not from printing and only in the mornings
Thanks...I have ordered that board..updates later..oh by the way if it doesnt work we will have to blame you of coarse :)
No error codes at all....just the flashing error light and like I say soon as you unplug the finisher the copier works perfect...can it be a board problem in the finisher and does the finisher have a...
customer says every now and then the machine will start printing blank copies when doing a job and would likely empty the tray if they didnt stop it. Error code history shows 305.966.00 but that...
Was working on a IR8070 copier, replaced the laser, and now the copier goes to a suspend mode when trying to print etc. It sounds like its going to print but just suspends itself. If I seperate the...
Thankyou very much got me out of a bit of a bind!!!!!
Just wondering how to get the WC to save the 400DPI setting in the scanning area. After a job is done it goes back to 200DPI...Looked in ser mode, admin etc. but couldn't see it.
Help thanks!!!
:)
Sold a used copier to a person and it looks like the CE password has to be reset...dont know what it is and if it isn't the default just how do you clear it.
Thanks
Thank you for the help!!! Saves me a long drive for nothing!!! Perfect!!
I have a rental machine way out in the country that is displaying a replace the drum soon message. Since its coming back in three weeks....is this warning just a nag message we can ignore till pick...
I have told the client what to check for and I will let you know what happins!!
I found it....thks...now to see how its set!!
Where is the "auto background supp." feature located. I dont have one of these in the shop to have a look see.
Thanks
Good point!! Worth a try!! Thanks!!
If it corrected the problem that would be awesome......
I second that!!! :)