When you wrote mag space roller you want to write guide roller?
Type: Posts; User: badicioiuv
When you wrote mag space roller you want to write guide roller?
Transfer unit is OK.
Hello,
I try to fix this issue, but i can't ...
When i printed or copied 10 sheets of paper or more, on paper sheet i found very few developer.
I changed developer, drum, i cleaned...
Try general reset.
Press and hold KEY 1+3 and Pon .
Wait until hear a bip then release keys 1+3.
Enter in Setting mode (Power on+0+8).
Press 388 then Start.
Press 389 then Start.
Power off, Power ON.
Replace HDD and update firmware .
Hello,
Search carrefuly onto fuser cover the actuator for exit sensor.
Is over there a spring who move the actuator in normal position when the paper has passed .
It seems the spring is out from...
Try that:
After unpacking and installing the FAX unit following the unpacking/setup instructions, be sure to perform
“FAX Clearing Mode / FAX Set Up” described with the same instructions. The...
I see attachment file.
What is the number of copies whith the drum?
You need to change the drum and the cleaning drum blade.
After that you need to performe color calibration.
Solved a similar problem, with new memories(main memory).
Anything else not worked.
If you vant to clean up all passwords, you must enter in setting mode and modify accesss control mode, from 1 to 0:
0+8+Power On
Then press 7 , press PRINT, press 0 (zero), press interrupt,...