Replacing the primary unit took care of the problem. No primary position sensor on the 6055. Thanks!
Type: Posts; User: NSCT
Replacing the primary unit took care of the problem. No primary position sensor on the 6055. Thanks!
Nothing above or around the upper primary corona. The lower pre cond corona has a sensor which is the one i replaced.
I ordered a new sensor. I opened the fan door for access and only see one sensor that is located on the bottom right side of the door. It does not look like it has to do with the primary corona. I...
Thanks much for the help. I will get the sensor ordered.
Thanks for the info. I have a new primary assembly coming. Would you by chance have the part # for the sensor? I do not have a parts manual for the 6055. Thanks again for your help.
Have a 6055 with A E-0060 Code which shows as Primary corona issue. Tried resetting in service mode but just comes back. Primary unit looks okay. Any ideas before I order a new corona unit? Thanks...
I had the same issues with them regarding defective drum units. The filters were the only items I still purchased from them.
Purchased the last ones from Katun.
Vac has been sold! Thanks for the interest.
Do not use it much. Just sits on the shelf. Figured someone here would be able to put it to good use.
Just sent some pics. Let me know if you need more. Thanks, Frank
3M Service vac. Has had very little use as the carry handle was broken off when new. Comes with all attachments including brush. Also has a brand new filter installed. Would make a great shop vac....
Looking for a fuser lamp for a old Canon NP-1820. Canon Part# FH7-4290 Will purchase a new or used. Thanks for any help.
Thanks Mosey. That was it. Much appreciated.
Thanks for the info Teckat. The youtube vid was very help full. Now i know why the customer tossed the cart across the room LOL.
Anyone by chance have the part# for the canon IRA-6055 EI Finisher stapler cartridge? This is the cartridge that holds the staples. The E1 also has the booklet finisher which uses the bigger stapler...
Have a Canon IRA 6055 with a E1 Booklet finisher. The stapler keeps jamming. I swapped out the stapler body with another one. Still jams every
time. I do not have another staple cartridge to swap...
Have a ir-2025 with 30k on the meter. The issue i am having is when you run copies through the adf the code pops up on the screen that the orig may not be scanned clearly, to clean the thin glass...
Thanks for the info Teckat. Much appreciated.
Need to order the Yellow sep damper pad that sits below the White upper sep pad for a IR-5020 DADF. Can't seem to find a part #. Any and all help much appreciated. Thank's,
Got the firmware loaded today. The mach seems to be running fine now. Thanks much for all of the help. Much appreciated.
Have a IRC-3080 with 130K copies on it. We replaced all three color drum units last week. Did not have a new black drum, so left the old one in and cycled up the machine with the 3 new color drums...
We still have a few Canon IR-330 units in the field. Been trying to purchase some RDH Sep Pads. Canon part # FF5-9160. Anyone know where to purchase these? DSN and Precision roller no longer carry...
Thanks for the info Teckat. Is it possible to run the copier without the finisher attached? Thanks again for the help.