Looking for an experience Copier/MFP Technician for the DC and Northern, VA territory. The optimum candidate will have 3-7 years of copier/MFP experience, preferably on the Ricoh product line....
Type: Posts; User: rickg
Looking for an experience Copier/MFP Technician for the DC and Northern, VA territory. The optimum candidate will have 3-7 years of copier/MFP experience, preferably on the Ricoh product line....
check the wire harness near the lvps. had couple of machines where the wire there were rubbing.
check SP5126 and make sure it is set to the correct setting
What size paper is it saying you need to have. I had a machine ask for 7 1/2 X10 in paper when feeding letter size paper. found one of the setting set to the wrong setting.
where are you looking to go?
Thank God that they won't be making any more!!:-)
Had a call for copier needed cleaning. A mouse left presents. Up on the hill found a full deck of playing cards in the duplex unit. Had a customer try to make a copy of a passport photo. on a fax...
This is a goverment machine. They need the hdd truned over to them before the machine can be removed from their location. I never worked on a canon copier so that's why I was asking. Thanks to all...
I'm replacing some canon mfp. I need to remove the hard drive but don't know where they are located. The models are C587ou and 5000. Thanks.
pull the fuser and check the heat roll drive gear. could be cracked. this is a common problem with this machine.
set the machine to copy mode. press function original size and 3. Go to f9, 06 ram initalize 04 to lbp fuser reset press start. power off then on.
I'm getting an sc 742. When you turn the copier on you get a remove jam for r2 & 3 then 742. Replaced the motor, lubed the stapler bar adjusted tension on the belt, and replaced the hp sensor but...
When we serviced US Marshall's machines they would meet me at a hotel parking lot, load me and my tools into a black suburban with the back inside blacked out. Drive around for 10 mintues back in to...
Does the machine have a bridge unit? If so glue so shimm stock on the actuator. It is possible that the bridge unit is causing the problem.
why not get a wavier signed before doing any work. This way you are not liable if their system goes down.
I worked for the big X for 12 years. Left there 11 years ago. I still know some of the tech that work there and most of them wants to leave. They will bring you on at a good pay but then little pay...
23 years in aug 2010. was told in 1988 to start looking for a new job cause the paperless world was coming soon. still waiting for that to happen
We get $.38 per mile plus parking. Owner think's it is to much. Then they complain about us having to go to the shop to pick up parts.
could help if you knew what code it's popping.
Looking for a technician that is trained on Ricoh/Savin or have Panasonic training. Please PM me with you contact info.
When you use the doc feeder does the paper feed down to the invertor assy?
What jam code are you getting? Try running the machine without the finisher, and see if it works. Could be ink build up on the fuser entrance guide also.