hello
i have a skew with original on glass (only copy mode, not print)
Type: Posts; User: connecticcut
hello
i have a skew with original on glass (only copy mode, not print)
i don't find "skew adjustment" for copier mode (printer mode it s ok)) (technical mode-machine -skew adjustment... maybe other place). Do you have solution, thanks
Hello
3 months ago (same problem). I have to replace HDD and after it were ok.
I haven t error code.
On thé drum i have à Good picture (really black) but thé transfert is 60%(not 100%)
hello
I have a bad transfer on paper. J have replaced the transfer belt and I still have the same problem. Do you have solutions
thanks
thanks so much (your last sp mode is good)
i want to write the IP adress in interface setting but i haven t this page in network setting (i take off the Fiery).what is the solution for invalid the fiery.
thanks
i have a noise in the main drive.The problem is it the clutch
i have to install the LCC.Before i received fax and report from first drawer.
i want for my fax report, to choose =from LCC.
i receive fax and it print it from LCC (softswitch 037 bit 5=1) and for...
i have to install PS card.It's ok for XP but it don't print with vista.
thanks
i don't find driver for vista (i have pcl and not ps card).It's necessary to replace pcl for PS card?
it's ok now.Problem with network card (to exchange)
you have 2 connectors = RJ45 (network) and USB.
the customer hasn't network and i use the second connector but i don't arrive to print.
thanks
i have to replace the bridge (or inverser ),but ihaven't to verify the arm (good idea).
it jam because it don't change the move...
thanks
first side ,it's jam after the fusing unit before to go in the dupleix
sometime i have jams after the fusing unit (only mode double side).
What is solution?
My computer don't see (connexion) the copier.I have to install driver but it don't print.
Maybe,i forget to modify parameters on the machine DI2510.
What's solution?
thanks
thanks.
I have to find,this is waste bottle.When i move the gear on waste bottle,the metallic lever don't come in front sensor (s23).It were a new Katun bottle..
first =to clean the AIDC sensor or replace the drum if the sensor isn`t dirty.
the motor turn (waste toner) but i have always this code error
try to clean the registration clutch
Classical jam problem
Feed
one way bearing (white)
clutch 1st drawer
maybe one way bearing(i don't never replace for DI350 but for DI3510 i often replace)
to avoid stumbling jams with the paper thick3 10pts, install a Feed Ricoh copier on minolta copier (first drawer).
I take cahoutchouc a feed (first drawer Ricoh 1224C). After removing (cutting it)...
yes ,it's the JPEG board...thanks
thanks for yours informations
i have to reset many times the code ,but it go back immediately...