The developer spills the way it was common with the black imaging unit in C650.
the drum attracts developer off the sleeve roller and it attracts onto the transfer belt.
Type: Posts; User: CKiiza
The developer spills the way it was common with the black imaging unit in C650.
the drum attracts developer off the sleeve roller and it attracts onto the transfer belt.
Good day good fellows.
Got this C8000, first it was spilling magenta toner allover the print as if broken charger, but the charger is new and intact. A quick swap with a yellow or cyan charger...
Hey all,
Have a C1070 which warms up endlessly but I noticed the low fusing roller lamp doesn't come on. I've checked the connectivity to all the lamps and it's continous.
Every now and then it...
Have this c654 firmware, how do I write it to the drive, it appears different from the other ways as used in the earlier c652 or 650 modles. Tried droping files on the stick won't work, tried using...
Hey, faced with on offer for a C1070. However the controller on offer is IC-601A which is an embedded system though my preference was an external image controller. Anyone ran this controller on this...
Got a C452 IH board with a 3B02 error, if replaced with a C451 board would it work properly?Secondly If I attempt repairing the board, what should I look out for on the faulty board?
Hi all.
Have a C7000 that has damaged temperature sensor TH/4 in the fusing unit.
Issue has been that the client's power hasn't been stable either but damaging 3 sensors
in 3 weeks causes me to...
Wen makin color images. Cyan puts a shaky background, changed IU, print head and HV board. But still no change.... Any ideas?
Hello guys.
Just installed a C7000 and one thing that's out of the ordinary is the fact that the Transfer roller is far too elevated toward the transfer belt that there is considerable friction ...
Not yet, hoping I can find a solution here,
it shows ALSO 004-354.
Not yet found a practical solution.
Any help with the code, or the list of codes?
Thanks
I'm in Uganda
where can I get the PWS?
Hi all.
How can I change language on Docucolor 2240
thanks
Hi all, a c450 machine had error c-d370. I did the procedure for nvram recovery. trouble is that the twain driver can no longer see it(scanner) for scan. tried to turn on everything in network...
There should be a way to turn off auto fill in user authentication, otherwise turn off "auto obtain machine info" and user authentication on the users whose accounts you don't want registered in the...
Hello guys,
does anyone have the timing chat for C203 from the booting process to the Ready to Copy screen?
The manual only has the printing process.
Thanks
16324Hi all.
Got a C353 which displays error C-C163.
When I do system clear the machine woks but
prints compressing all the work on half the page as shown in the attached scan.
According to the...
Scan the image and post it so we can see wat you see. then we can know where to look for the soln.
Hi. All does Anyone have Fiery X3e system software for Pro C500?
My email is aziikcaleb@gmail.com. please help me.
Thanks
Check the Home position sensors for the black IU in the main drive area at the back. It should be dusty and causes the machine to not read the exact position of the Black drum. Clear the dust and you...
Hi guys, have a set of Bizhub 43 machines which have all gone dead in just about the same way, They power but will not boot fully. only the "menu fax,scan,copy and start keys light continuously. The...
That precisely is the problem, it displays xxxx@xxx.com as the mail from which scan mail is being sent.
Is there a way to make it display the machines' email ID as the sender ID instead of...
On these machines when in User Authentication mode, by default, the scan mail is sent from the logged in
user's mail ID. Is it possible to set it to show the sender's mail as the machine's mail ID...
There should be something that should be something abstracting the sensor so check the sensor(S) in that region,
if you can't find anything unplug a sensor else where on that path to see the way...
Hi guys,
Does anyone have any idea what the life of these machines C6501 and C5501 is before they expire?