Search:

Hi,
Try to change to Designs[CAD] in tab Quality of Printer driver if you are using UFRII
If not effective, please upgrade machine to PS printer kit.
Thanks!
Luu

Hi Victoryprinting,
I assume that your machine has not been maintained for long time.
As you may know, this machine use only one drum and 4 developing unit rotate around drum so toner usually drop...

Try to use Controller-self diagnosis function on iR Advance series.
a/ Boot System Error Diagnosis Tool: Turn On machine while pressing Control Panel Power Supply Switch
b/ Controller System Error...

TGM may be target machine. There is firmware failure in USB so program could not find suitable firmware.
Try to register firmware into USB and do it again.
If the problem still persists, pls check...

Hi Tibs,

There is no official technical bulletin about stuck of gears in drum unit.
You have to do modification by yourself if you want to save cost.
Good luck to you

Luu

Hi Tibs,

Please see attached file for your reference

Thanks!
22590

Hi Tibs,
This symptom is quite popular for most drum unit of Canon iRAC2000 and iRAC2200 series.
Canon has issued a technical bulletin how to detect drum unit cause clicking noise
and the solution...

Hi,
I don't know why you want to do like that
It is impossible due to there will be some hardware modifications to prevent interchange.

Hi,
Try to use other application to get scanned image such as office, adobe acrobat...
From that you can verify the problem come from whether network scangear or paperport
Good luck

Hi,
For laser problem, the image will be feint.
In this case, I suppose that you should try to adjust HV of developing, primary charging or replace HV board

Hi,

I have had same your problem
Try to do some following replacements:
- Drum
- Starter(Your case, replace Cyan starter firstly)

Note: Check grounding of machine

Good luck!

Hi,
You did wrong step during replacing new motherboard is re-install system software.
EFI has cautioned this issue in it's service guide. I do not think you can fix this problem yourself
Try to...

Hi,

I have a same case with our machine(iR3320, iRC3220N). I do not know why ... however it has been settled by setup more a cheap hub or a switch near copier and connect our LAN cable and copier...

Hi,
Check in user mode
common settings>Limit function

Hi White_Toner,
Your problem is to relate scan unit
Try to do do some following checks:
- Clean CIS
- CIS white level automatic adjustment: SCAN > READER > FUNCTION > CCD > CCD-ADJ
- Replace CIS...

Hi All,
For drum cartridge that create light image, please try to increase T/D ratio by this setting:
Copier>Adjust>Dens>P-TG-X(X:C, M, Y, BK)
Here is procedure for Y color
Adj of ATR control...

Hi All,

This issue of BK Drum Unit is quite popular in my market. We are very surprised why that symptom can happen while machine has some technologies to control toner level in drum cartridge...

Hi,
Your symptom is common on server T1.
Please reinstall system software of server and then do configuration it such as network settings...
For system software, you should contact to canon or...

Hi Mramlawi,

To use secured print function on iR2500 series, you have to upgrade 2 things:
- Latest Firmware
- Printer Driver
and then do changes in driver :
-Choose 3.0 or later in Device...

Hi All,
Should put that machine away and upgrade to iR ADVC series
to save time and money
Regards

Hi,

You have to upgrade RAM to 512MB before register those licenses

Good Luck

Hi Ramana,
I very understand your situation due to I also have a long time to serve iRAC9065PRO
Frankly, that series is not suitable with printing production. Although it is under light production...

Hi,

I think you should re-upgrade firmware and check subsequently other part

Hope to get good news from you soon

Nghia Luu

I have a same case and had to replace Power Supply Unit.

Good luck to you!

Hi All,

Canon has found the reason of that issue so you should contact Canon representative to get support

Good luck!