We had to replace the wiring harness to right side door. Not fun. I think we left a lot of the old wiring in there and just worked around it, lol
Type: Posts; User: JR2ALTA
We had to replace the wiring harness to right side door. Not fun. I think we left a lot of the old wiring in there and just worked around it, lol
You'd make a very good copier tech! I wish you the best. Unfortunately, there are no "Home Depots" for copiers...it's hard to obtain parts and without a dealer discount, the endeavor will quickly...
Hello
I bought some FOBs on Amazon to use with a fleet of Xerox card readers. It allows me to associate my FOB to the admin login and works for the remainder of the day roughly but after some...
Well, then my suggestions deserves at least half a "like" no?
Corrupt Data. Perform SIM 66-29 and you'll be good.
Hey BC, I enjoyed our dinner last year in Novi! I would like to blame manufacturers, too, but as I understand the move from heat "rollers" to "belts" is a result of holy bible Energy Star mandates. ...
The HP work horses will never die. There's an endless supply of refurbs and parts available. Fortunately you only need maximum 10 parts to keep them running forever.
it's a refurb? did you run an "intialize private data" maybe some protocol settings were changed years ago.
Those excessive, repetitive small slots are such a pet peeve of mine with tool pallets. Different nut-driver sizes I guess? but so wasteful for my needs.
check email
You can find some of those on laserpros
Xerox Service Manuals
Keep drums, rollers and BTRs on hand. Everything else runs pretty smoothly.
I don't know this model BUT in the exit section - post fuse- there are often foam rollers designed to "reverse curl" and I have seem them wear down.
what do you mean 'They can be removed"? Do the toner specs simply wipe off? To me, that would mean they have not been fused and you have exit section that needs cleaning. Maybe you can increase...
[/QUOTE]
it magnifies for me just fine. developer thermistor error. replace developer unit. personally i've never seen that code before.
• Beginning with tax year 2018, you can no longer deduct unreimbursed business expenses if you are an employee.
Federal Tax Laws on Mileage Reimbursement - TurboTax Tax Tips & Videos
I'll...
I was under the impression such itemized deductions were eliminated in the tax overhaul of 2017
If it's Chicago, it's probably Impact.
The test posted now is 2024. So maybe I missed 2023?
I got 82% a few years ago which got me to the in-person semi finals. That tells you, yes it's very hard. 82 barely above a C+.
The test posted now is 2024. So maybe I missed 2023?
I got 82% a few years ago which got me to the in-person semi finals. That tells you, yes it's very hard. 82 barely above a C+.
Not an easy PM if you're unfamiliar with this model. The drum is trickey to get off the rail and the fuser cams need to be retracted with power on without fuser.
Just checking you plugged in all...
They are the same. They don't even make 60 anymore, both use 61 now. Bulletin 20012
We tried the panel LVDS and thorough cleanings but it the end you have to order the panel. I would avoid Hytech rebuilds as I doubt they are testing long enough to know if it wanders out of...
Pretty sure the numerical pw only works at the machine, not Web interface.
I would start with transfer belt and cleaning IDC sensors. Fixed my goofy error (similar not sure exact) recently.