Why would Ricoh have a finisher that folds and staples an 11 x 17 and 8.5 x 11 and will does not give you the option to fold an 8.5 x 14 to 7
Type: Posts; User: mcbrides printing
Why would Ricoh have a finisher that folds and staples an 11 x 17 and 8.5 x 11 and will does not give you the option to fold an 8.5 x 14 to 7
Yes, all 3 are still available
I have had a Konica 8050 for 4 years. It has been an OK machine. We now own the machine. I have call the company that has serviced it for a couple of years to get a service contract on the machine...
I am about to get rid of Konica 8050. Any comments about Ricoh 5560 who be helpful
I need space. Free or best offer St. Louis area. I have had it with the Service on Konica 8050. It has 1 1/2 million on counter. The machine is paid for and working OK. I have been trying for 1 month...
The smearing is like a pull roller that is offsetting the image on the reverse side
While printing 11 x 17 in Black (grayscale) I am getting tracking of toner about 3/4 inch down the 17 side.
I tried printing a sheet of almost blank 11 x 8.5 paper. After about 12 sheets it went...
Thanks for the info. After it got a couple of plastic plates jammed and warped, I pulled the the cleaning unit out. It looks like it has only a month left of material on the roll. I zeroed out the...
I am getting a message on panel that says Exchange Cleaning Unit for fixer. I looked it up in the manual. It does not look difficult to exchange, call service. It normally takes at least 4 days to...
Cleaning the dust and debris out. I did not go to deep into machine. I only took off right side cover and cleaned fins. No error codes since. Tanks for your help.
I am getting SC 41-09 quite often. After initial startup the machine will shut down with SC-41-09 after approximately 30 minutes. I will restart and start printing and sometime it runs 30 minutes to...
Thanks for the info. I have a book, but I could not find my problem in the trouble shooting and I am not getting an error code.
John
I recently had the yellow developer and yellow drum replaced by service tech. All the colors register and the sheet looks fine except I can see a full yellow tine on the complete sheet. It is similar...