Can i also get a copy of that file? Thank you. I never loaded a movie file so this should be fun to try.
Type: Posts; User: mailderrick
Can i also get a copy of that file? Thank you. I never loaded a movie file so this should be fun to try.
couldn't you just turn off the enhanced security feature?
This was a good read although it sounds was a result of many hours. I am glad there are techs like you out there that stick with it and actually try to figure out what the problem is (and then let...
I'm having this problem on an AR-M355U and i looked in the Service manual and also do not see how to enter secret SIM. Is it the normal SIM code but the 80 is the secret part or is there a secret way...
Tekcat, it seems like you are one of the main Canon guys that i see on here.
Years back i have 1 canon 730i that would not receive, i had another one of those machines that would not send and then a...
Hmmmm, maybe i should sell him a newer cheaper machine with less problems. What is the part number of the network card and scanner card?
I found for a network card for this machine off of a well known Konica Minolta parts place. They had listed the card as a NC-1 (4625-161). The customer ordered it and called us up to install. When we...
I thought when he said he did a clear reset he meant a cold reset..which is why I went to the next thing, plus better chance on this machine that it will need NVRAM reset. HP guy is talking you...
What sucks is i know there are horrible techs out there that would use that information for bad purposes. It is not always for illegal or bad reasons though..for instance a few weeks ago i was...
Sure, I can help you with all that..even better..pm me and I can send you a link of all the HP service manuals. Hey, you're also in San Diego? What company do you work for out of curiosity?
I thought you posted you already tried d/c the hard drive? If it didn't go away then it's not hard drive. Try an NVRAM reset, that should do it, if not then you will need to change the board
I am aware of that in fact if you read my next to last post you will notice that it says I realize it has been awhile. Also, my last post says I wonder what the problem WAS.
I thought this forum was...
you ran across the same problem..blank sheet fed through while jamming? and it was the paper feed? hmmm i could see that being the problem just with the jam code but if you get a blank page through...
I'm curious as to what it was but in my experience on this model i would pick in this order.
1. Hard Drive
2. Hard drive cable
3. Firmware
If you have any updates i would love to hear...
Have you tried doing a factory restore?
Hello, i wanted to see if you got the printer fixed,. I am fairly good with HP and i may be able to help you. Let me know. Thank you
ok on this particular model .. is it [P]
[C]
24[START] [SUBCODE] [START] or interuption...or something else? Thank you again for all of your help.
Derrick
I was at this customers a few months ago and did the reset code for the fuser and removed paper and suggested they replace the fuser as it was worn. I never worked on this particular model until this...
I just saw this..odd no one ever responded. What did you end up finding anyway?
Derrick
Everytime we run a test page - the printer throws a 13 jam with the page starting to exit the fuser. The printer also will no longer connect to a computer through the network or USB although in the...
Thanks, I remember you helping me in the past with a Canon. I hope it is not firmware as i do not have acess to it on this model. If i did a logical format, i wouldn't need to reload firmware, would...
Here is an email i just received and i am a bit stumped as to where to even start. I know the touch display has been acting a bit touchy but just the usual stuff where it doesn't hold the calibration...
Hey i found this thread thankfully. i went up there and long story short i ended up having to change out icp5 on the print control board. Amazing! i don't know how you guys figured it out but it...
2 questions on this topic. The guy i go to for advice has been with Konica Minolta for ..i don't even know how long.... i would guess close to 30 years. He always has the answers and seems to know...
I have just had this same exact problem and i had a heck of a time trying to figure it out. It is a board problem but it is actually the Printer Control board(specifically ICP5 on the board burns out...