I WIN!
Type: Posts; User: dberisford
I WIN!
Great Tip. If I run into another I will try that. Great work.
Daniel... Tech
Whoa Blackcat! You shouldn't post if you don't know jack about the model. The 4345 has 11 sensors and operates quite like a copier minus all the stupid feeding rollers and 350 software switches. This...
Are we talking about the computer attached or the scanner or the main plotter printer? Either way, the scanner and the plotter itself have a firmware update that cures shut off's on the 815mfp. I...
I never did figure it out but you do have the exact same problem I did it sounds like. I changed the Engine Board and got about 400 pages out of it then it quit again with same symptoms. It is most...
You may have a cleaning roller issue with a spring on the right side if you open the right side and remove the big drum unit. On the right is a little white clip which has a spring attached. The...
The error says that there is a "broken bag" error in the cartridge itself. When you place a cartridge in the machine, air pressurizes it so it can force the ink through the tubes system. it...
Problem is back. I have the flu but i was notified the jamming continues. Stupid p3005's.
I am not familiar with that software. HP has their own counter software that can send emails to you if needed. The software is called Web Jet Admin. you may or may not have heard of it. It is great...
Just for the hell of it I want to add my 2 cents. The fuser is the problem in my eyes. copier_guy may be thinking of the grittiness of developer but the rubbing off of toner is for sure a fusing...
THis is a quick note for someone who stumbles on this print quality issue and has a print quality issue. I have seen, just this week, a transfer roller pad work its way out of the print path so far...
The 4226 will need a printhead for sure. Possibly a ribbon if its worn and a display if the text is garbled. try Printer Toner Cartridges - Copier Toner Cartridges - Printer Parts & Copier Parts for...
I have a BS in BS. My BS degree if you will... :)
I would try the following things:
1.) Replace the network card with a 620 HP jetdirect card. The cards memory buffer could be corrupt.
2.) Restart the print spooler or contact a computer...
We manufacture this cartridge also and the #1 issue is the cjips we get. They keep a page count stored. Try changing the OEM carts like the guy above said. Otherwise change the DC controller and get...
So, the printer is working now. I decided HP tech support were mohrons so I took the entire printer apart. Engine brd, formatter, covers, laser, reg assy... I found nothing wrong. All plugs were...
Most everyone is sitting in their seat thinking, this has to be recycled cartridges! Well, as a company that manufactures toner cartridges from scratch, we know that those cartridges are probably the...
Looks like I have some work to do tomorrow to answer some of those questions. I had the covers off and can't see shiznit as far as paper path nicks. I can pull the page and tell that the leading edge...
Nothing There...
Ok, Folks, Here is the deal. This is a continuation printer from the HP 2400/20/30. The printer has alot of changes from them but the premise is basically the same. The paper path is the same. Now, I...
I literally had this problem yesterday. It turned out it was a print spooler running on windows XP. Have the Admin restart that service. I agree with the previous post. I always try a crossover cable...
I agree with canonhptech dude guy. :) The pick up assembly is also a nightmare. They always break. I have had 2 occasions though where the felt pad actually fixed a feed issue. Not separation, but a...