MyQ is great software. Kyocera's KMnet Manager is actually MyQ, but with out other vendor support as well.
Type: Posts; User: spandx17
MyQ is great software. Kyocera's KMnet Manager is actually MyQ, but with out other vendor support as well.
You would need a workflow setup using the DMS Link Hypass App to be able to OCR documents when scanning.
Does it have Fiery controller?? If so, bad controller or the HDD is bad. replace with a 2.5 in laptop driver and reload firmware through a centronics cable.
It could have been the HDD in the first place. I had a similar issue with a HDD problem
I have one customer that has a specific blue used for a logo. We have installed a Kyocera TA5550ci with the Fiery for spot-on color matching.
My cheap boss will not get me a Pantone color guide to...
You can try installing a KPrint port. Kprint setup is found in the Installation directory for the driver. Install and configere a network fax port. Set the Fax driver to use that port.
I had to replace a formatter in a LJ P2015 and of course it wiped out the page count. Is there any way to reset the page count?
I have tried every possible thing I can think of.
One of my guys replaced a gear pack and on a c550.The machine comes to Ready, but the Start button flashes orange and never goes to green. Any thoughts?
I always seem to get Authentication errors, even with a valid account for the machine. I know that TLS is not supported. I can usually only get it to work the SMTP connecter set for anonymous access...
Thanks! Will give it a try. I hope the new machines will support TLS!
May be an IP address conflict. Some other machine on the network may have the same IP. Try to ping the IP address with the copier's network cable unplugged. You get a reply, try a different IP for...
Does anyone know how to get the TaskAlfas to scan using Exchange 2007 on an Windows 2008 server? I have tried on 5 different installs (with and without IT help) with no luck.
i usually end up...
Thanks for the Help!!
I was hoping that someone may instruct me on how to clear the memory on some Sharp copiers. I work for Kyocera and we picked up 3 Sharps that need to be reformatted or memory cleared, before they are...
Glad you figured it out!
Press the Status key on the operation panel(It is just below the System Menu key). From there can select the printing tab, highlight the job and select cancel!
Kyocera does not have a scanner file utility for scan to PC or TWAIN for linux. Only possible way would to use the FTP function. Setup FTP on the linux box and the path. Enter the Hostname,...
What model machine did you replace the HDD on?
What SMTP port did they say to use? If it is 585 your are pretty much SOL!! Most companies like godaddy and Google's GMAIL use TLS encryption for authentication. According to Kyocera,TLS is not...
You could also try setting a print job to offset. This could eliminate someone accidentally mixing the jobs at the machine. It is under the Finishing tab\Separation section of the print preferences...
What would be the best software to clone a hard drive on a Fiery for A Bizhub c550? I have tried several, but cannot get the Linux boot file to copy! I don't have the system software and I am having...
the 3050 and above have a status button on the panel. I really like the new Taskalfa 520i. It has a faster processing speed
Try the Job Queue button above the display. It will not have a job log, as do the newer copiers, but will let you interrupt or cancel a job.
Have not setup a samsung unit, but have you tried mail.bellsouth.net? Setup on port 25 with no authentication. smtp.att.yahoo.com/port 465 requires an SSL encrypted connection with valid...
Is this in print only? Or copy