Search:

Hi Dears

I have xerox WC5655 copying very good in single copies with duplex function.

But when making duplex group " group of 2 side copies" giving jam after 7 to 10 groups.

I Upgrade...

Please check attached file

Hope it helps

Regards

Hi
I formatted HDD for Toshiba e-studio 455 machine by using 08-690

After that the machine works only without finisher.

If I connect the finisher and on the machine it gives Ready to copy.
...

I installed firmware from Xerox site.

Its ok now

Thanks everybody

Special thanks to Mr. Exok

regards

I have Toshiba e-studio 2820c, I got message "time for periodic maintenance".

How to reset it

Please advice

Regards

Hi dears

I need firmware and upgrade procedure for Konica Minolta bizhub 751.

Thanks in advance

Regards

Hi Dears

I installed firmware (D2505453000_00_1.DLM) for Xerox workcentre 5655, after installation the machine asked a password for diagnostic routines.

Please give me the diagnostic routines...

Hi everybody,

I have Xerox wc 5655, the fuser not working and gives message replace fuser unit.

I replaced the fuser several time and the message still appears.

I checked all connectors,...

Thanks for your kindly reply

I did not change IU, the copy quality is good but I want to remove the message only.

I had the same problem with bizhub 600 before and I cancelled the message, but...

Please Dears,

How to reset drum replace message for Konica Minolta bizhub 652

Thanks in advance

I have the service manual but I did not find any thing about this matter.

regards

hi everybody

I have KONICA MINOLTA BIZHUB 282,

After warm-up I tried to copy, then I got this message


!*! ABORT !*!

code = 0x00e00133

Can I get Xerox workcenter 7228 service manual# I have Xerox 7232 , all ricoh service manuals, all Kyocera mita service manuals and Konica Minolta service manuals

We have newly installed one machine model TA DC2250 one month ago.


Now we got a problem that the touch screen does not functioning at all.


We off and on after that the machine gives...

Thanks for your kindly reply.
I did the same but the problem is the machine gives the same screen without any options.

I want to adjust the color because there is problem with magenta colors.
...

Hello

Any body know how to enter UI Diagnostics

I changed black developer and I want to adjust color and reset developer counter.
I have the service manual for 7132 but I didnot find how to...

I have Canon Ir6000 copier.
I have parallel interface only.
I downloaded win7 driver.
I installed the driver sucssesfully.

When printing the machine gives message ( reciving) blinking and the...

Hello Dears,

I have xerox workcenter 7232
I want to change developer black

I need the procedure of that because i dont have the service manual.

any advice

Please email me...

Hi dears

i need canon ir6000 firmware

thanks

Hi
I ahve canon IR2800 machine. the HDD is difective. I have same HDD but formated by computer.
How can I use it for the machine.
I need the software and the instructions for make it ready.
...

Please send this firmare with instruction to my e-mail awad@united-marketing.com

Because I formated the hdd and the machine not working.

thanks and best regards