Search:

Not sure what that is. The service log is for service call activity, what was cleaned, replaced ect. It also has a list of the consumable parts with part numbers

Hello, i'm looking for the Canon service logs for the new adv. products (ie: 5550, 65507550 ect.) I have the logs for the previous generations, just like having the consumable part numbers at the...

Hello, have an old Imagistic 2520 jamming in the adf. Replaced feed/sep & p/u rollers. Paper feeds in the stops just pass the first set of rollers by PC9. Haven't work on this before. Jam after ten...

I have haven't done it
Try in service mode scroll to #ACC scroll to Coin enter-1. Hope the works.

i looked at it,seemed ok. but will give it a try. thanks

Hello hoping for help on a mach. i am not real familiar with. Cust. says it jams from tray 1. I didnt get it to jam but it was skewing. cleaned an checked all the rollers in the paper path, then...

Hoping for a little help, on a mach. i dont know much about. I have a cust. with a Lexmark C762 with an issue with the transfer belt (ITU unit) not cleaning properly. Is there any other option,...

sorry for any confusion, the two screws that hold the lens unit are the only adj. i did ( for the hash marks on the mach). did not touch the 8 screws on the lens and ccd the manual says not to touch

hello i hope i can find some help. Have a Estudio 45 that makes dark (almost black copies, test print are fine). Checked the error history and the mach. had serveral C26 codes. Replaced the CCD/ lens...

hello, need to find a print driver for a Estudio 28, using windows 7. Toshibas website did not have one. If anyone can direct me to this driver that would be great. Thanks

it does is form both the glass and df, and both cass.. got the reg. clutch on order, will know more after that. thanks for the ideas

hello, i have an AR-207 that the reg. is 1 inch off the lead edge. another tech was out yesterday and cleaned the clutch and all was ok. the lead edge does not vary, alway the same 1 inch. any ideas?...