How are you all
The problem is that the paper stop in the ADF
http://im33.gulfup.com/aLUFr.jpg
NO 23 is stop paper
http://im33.gulfup.com/7d7Ts.jpg
Type: Posts; User: abbas saeed
How are you all
The problem is that the paper stop in the ADF
http://im33.gulfup.com/aLUFr.jpg
NO 23 is stop paper
http://im33.gulfup.com/7d7Ts.jpg
how are you
I have printer hl4040cn copy not clear , Show some of the points in the paper ,please help me
how are you
i have 2 brothers cmoes hl 4040 error (32) (20)
1_ Brother Printer HL 4040 Print unable error 32
2_ Brother Printer HL 4040 Print unable error 20
help me
Thank you
The company will change because the new printer
Thank you all and I am grateful for your help .
Tomorrow i will try to do what you said
how are you i have on printer comes ( mo ) and i cano't do any thenk and printer not working after i of and on no power help me thanks
I have found the solution
There was a problem
Installation
Thank you
bojans
Thank you brother
Your answer correct
Thank you my brothers and I will try to find a solution that gave me
How are you
I have a bh 211 , I replace (dr114) and (dv110) but after that , copy light
Before changing the (dr114)and (dv110) the copy was good except for some lines
help me
hi
i have brother 3040
comes Change toner
i bot new toner bot also comes message
helped me
thank you
F8 after the show this problem and you need to adjust the ATDC to 185 or 180
I'm sure
hi
Konica Bizhub 250 The screen does not work
I watch all the options but when you click on them do not work
Has re-run and pressed 33333 but when I click on end does not work
So go and work...
but i checked same toner cartridge on other printer an it work
How are you
I have a printer of the type of Brother 3040 printer stopped after two months and back message (please change BK toner)
Im not used it with much
I got the C3541 error code on my Konica Minolta Bizhub 250 (black and white).
I know that there is a problem in the fusing unit, but what is the solution
Thanks to all
How are you
I have a problem in the photocopier model EP 3000
Shows the machine code M4
Respect to this code at the time of maintenance after the number of copies .... Promising a full...
Thank you
Surely will change all the pieces required
Cleanup with all residues
Thank you
But I want just the way to the work of the reset
After you change and maintenance imaging unit
How are you
I have a machine bh_163 and 211
Stopped working
Show me a message (M2)
I know that to change the cylinder
It then must work to facilitate
Machine to reset to work
thank you
The one who brother fax each time gives me a report Mnfrz which reduces the life of the ink and paper
In fact, I want to stop these property
(Off to give a report after each operation)
I do...
True
Most errors easy but it remains difficult to detect
Thank you
I went early to the customer the day after to make sure the integrity of the sensor and when my question to the customer
Is the paper fully removed?
He told me yes
It turns out...
How are you
I have a problem I went to one customer and told me that there is paper stuck in between the side cover
And then removed as usual at a time
But this time, you know that the machine...