Thanks for your help guys some good points I will check these ideas out.
Type: Posts; User: worthy67
Thanks for your help guys some good points I will check these ideas out.
Hi I haven't tried this so will give it a go Thanks very much for your help
Hi wonder if anyone can help
got an imagepress c1 that keeps just switching off and rebooting of its own accord.
The green power led stays lit on the controll panel and the main power switch...
hi yes its happening now from all locations , any stock, any size of paper
i will get him to check out the that procedure posted
thanks for your help
hi
just to let you know whats happening
we have ordered a DC con 2 days ago still not arrived now the machine does E021 0101 on every stock customer very p**sed off only had the machine 3...
hi
there are no delay jam codes as i know of just the Error code and the customer only prints to it .
we have tried both Bypass & deck it runs ok as heavy 2 stock
its on mainly Mac...
hi guys
our engineer went back to try some more things at the request of Canon
We tried coated stock through the bypass with the relevant stock settings
and it still threw the E021 0101...
Hi
i know i agree its not really a good idea , we just did it for pocess of elimination .
The deck is registered for coated stock ,it switches on fans that improve separation of the coated...
Hi
plain paper and other types of stock work , also if he puts coated in the paper cassetts it works but that said i thought you couldnt put coated stock through the cassettes so i think my...
hi thanks for reply
pretty sure the copier is level its in a new office environment and its replaced a C1 they had there for 2 years .
Its worth looking at though, but it still this issue it...
Thanks for the info i'll get my tech to check these units.
But there is this issue of the POD deck A1 the E021 error only occurs when printing from that unit, if you run the prints from any other...
Hi hope somebody can help
we installed a 9070 pro just under 3 weeks ago customer has done just over
40k .
We have already had to replace magenta & yellow dev assy due to rear of devs starved...
hi yes they are i think its a Fiery GX300 it looks a bit like a Q2 rip.
The customer is making brochures on them then using an offline perfect binder and trimmer.
Thanks for your input the machine will certainly be getting some use possibly 60K a month
just a bit worried about copy quality a we had an Imagepress C1 in there before and it ran like a dream copy...
Hi has anyone out there had any dealings with the new canon ir advance c9070pro
just wanted some feedback on reliabitlty , copy quality.
We are a canon dealership and have just put one of...
Thanks for the input guys managed to sort it after a couple of hours of staring into the abyss .
It turned out to be the duplex assy ,the plastic part that drops down when you clear a jam.
It wasnt...
hi
sorry i should have said its more of a wrinkle almost like a z fold .
when you watch the paper going through the machine you can see the wrinkle as the paper takes its path under duplex assy...
Hi ya thanks for the reply yes i have replace them in the past .
Its a weird one i think the delivery and reverse assemblies are very flimsy.
If i put a heavy stock a3/sra3 through bypass it jams...
help got a problem on a lovely c1 !
when printing on a3 or sra3 stock face down print it has a kink in the page about 3 quarters down the page .
a4 is fine but getting occasional 010d jam
...
Hi Penvy
You have my sympathy we have had the same proble on a couple of our machines that had been blitzed new dev assys primary corona , filters, ITB belts ect new drum probably done 2-3k in...
Hi does anyone know which software sw do i use to make an (generic) olivetti d colour 250 mf to a konica minolta c253 ?
Thanks
hi i need to turn a Generic machine to a konica minolta how do you set the dip switch settings ?
Thanks for the helps guys i managed to get the thing goin again did a DC con clear re input all data this sorted it out.
I have heard potential issue from canon and thats to to with resistance...
Help im losing the will to live ! Canon imagepress C1 are ruining my life !
E 020 XX89 or 8b points to the bloody patch sensor its been replaced ,new drum ,dev units , itb , various wiring...