Used copiers:
B&W: iR7095 or iR7105 - these are quite reliable production copiers/printers. If you find one with 1M or lower meter reading, go for it.
Color: iRC3380 or iRC3580 - these are real...
Type: Posts; User: iRC
Used copiers:
B&W: iR7095 or iR7105 - these are quite reliable production copiers/printers. If you find one with 1M or lower meter reading, go for it.
Color: iRC3380 or iRC3580 - these are real...
When powering on the MF8030CN, it shows language select screen for about 2 seconds and then E736-000 and some japanese text comes up.
Service Manual says:
E736-0000 Error in CCU-modem...
The iR6570's cassettes 1 and 2 cannot be changed to A4R. They are only meant for A4 or LTR.
And A4R is always slower than normal A4.
1.Check the cable. Checked, no defects.
2.Replace the DC Controller PCB (PCB4). According to the parts catalog, there's no DC-cont; the Engine cont. PCB has been changed.
3.Replace the Cassette...
After reading many threads about iR25XX -series E716 codes, and still not finding a solution, I decided to write a new thread.
This particular device started to act weird after 30k prints. Now it...
Problem solved: At first I changed the dev. assembly, but the problem wasn't fully gone. Then I changed the drum and ran another 50 copies, which were all good. So the freaking dev. assy broke those...
Hi, and thanks for your advice. I didn't have time today to go and try all these advices which are told in this thread. I'll try to make it tomorrow!
Yes, I've changed the whole drum assy two times. No luck...
Montana: I've ordered a new dev. assy last monday. I'll change it if drum contacts are ok.
Canon.Tech: Yes, all consumables and parts are genuine Canon.
I'll go tomorrow and check the drum contacts; I reckon that'll probably be the cause. Thanks! :cool:
Yes, the toner is genuine Canon.
Issue occurs also with reports. At first I also thought that the cause could be the developing assembly. But shouldn't the stripes be white then? If dev assy is bad, then there should be no toner at...
Sorry, I forgot to mention that. The toner coated surface is 1/4 along the drum and the whole circumference of the drum cylinder. Starting at the backside of the machine towards the user. So every...
Customer has an iR2000, which leaves toner to about 1/4 of the drum surface. So it also affects the output quality.
I've replaced the drum with brand new one for the second time, but no luck. Those...
I've got exactly the same problem. Even if I choose several copies from print driver or from program, or from both of them. Only way to print several copies is by changing amount of copies from the...
Service mode levels 1 & 2 are the most needed ones. I'm fine with them... :cool:
Sorry about the delay for answer; I've been quite busy with other things.
DF and scanner connectors and the reader controller are checked and they're working.
Situation is getting worse, now the...
Hi!
It's nice to see that I'm not the only Finn in here.
Tervetuloa!
Yes, I've replaced the feeder with a working one. But the problem stays. So the issue can't be at the feeder itself. I'm suspecting that the scanner unit is defected.
The machine is at our office...
Still experiencing same issues after these steps:
-ADF sensor init.
-SW Update to newest version
-DC con clear
Now I'm thinking that the scanner itself might be faulty. Any ideas?
No I haven't. Better try that before DC-con clear.
Is this common issue? I'm asking this since nobody in our company hasn't seen this issue before. And not all of our technicians are newbies like I...
iRC4580 has issues related to the ADF. All originals get jammed at the sensor P11 (the last sensor before the exit). Jam code is 0001 (stat. jam). Tried to swap feeder with working one, but no luck....
iRC3220 ain't that bad option, but I'd choose a device from the iRC2380-3580 range. Those devices are real workhorses; we have few of them with over 600k in meter, and they are still running with...
I've noticed that almost all new Canon models come with 101 -counter hidden. That's quite odd, since it's probably the most needed counter. But I always just add it to the 7th. counter slot.
Last...
I've totally forgot to answer to this thread. Sorry about that!
My problem was cleared with the CCD -adjustment (lucky me). But it's nice to know that there's someone even dumber than me :D. I've...
The A1 refers to the imagePASS-A1, which is the "smaller" RIP
CW= Command Workstation (the software used for managing the print jobs).