Look for locally for any surge protector plugs that includes Ethernet surge(Network surge) protection.
Or phone a Konica Minolta, Kyocera, or RICOH dealer nearby and ask what they use.
I liked...
Type: Posts; User: allan
Look for locally for any surge protector plugs that includes Ethernet surge(Network surge) protection.
Or phone a Konica Minolta, Kyocera, or RICOH dealer nearby and ask what they use.
I liked...
Have you check the small timing belt on the motor for damage?
Here goes the first one for me. Looks like I could have a problem buying it locally from KMSA. The ZA shop does not show any pricing. Useless...
We are a small company supporting a couple of large...
Clearline is a brand I trust. NOt sure if they are limited to ZA.
They are all build with the same basic components so it depends on reputation. Here our OEM suppliers sells us there branded...
Ok silly I am...
Figured it out but wow yea for a site selling UI's the UI sucks a bit.
Sure I will get stuck somewhere else again.
Anyway may be a good place to ask about the experience...
I am new to all this but managed to get google connector working, kind of. Its a trail version and does not stay logged in to the google account but works great on testing. I can see it gives you a...
Check if the registration sensor flag is not stuck or use sensor check in service mode.
Is there any image on the page and registered correctly?
Yea that is strange.
All I can think of is that there could be a latent charge form the yellow and cyan toner on the transfer belt. The black is always running against the TBU and could pick up...
It looks like the edge of the page. I am familiar with the internal printout. It looks like soiling more than lines to me.
Would be better if the OP can upload a PDF instead.
This is where 3D printed gears would be handy.
How is the condition of your fuser sleeve and pressure roller?
Just had some customers upgrade there Linux mint that caused the smb to fail.Had not been able to resolve the issue yet.
Try to enable SMB v1 using SAMBA.
Then there is User Box SMB file sharing...
The SMB version on your machine could be outdated. What model of machine and what Linux distro?
With the 4 series machines I use filezilla FTP for scanning.
Or apache using a webdav server should...
There is a high voltage leakage between the drum unit and the devtank.
Sure you can feel the developer on the paper?
Any scratches on the drum ends?
Did the dev colors collapse or the seals worn...
Agree that the NVRAM battery is bad. Check under trouble isolation it the fax option is set if so unset it.
Do not print PDF documents directly from your browser. Download the PDF and open with a dedicated PDF reader.
Not sure what the issue is printing PDF's from chrome, Firefox ex. It slow or simply...
+1 on the scanner. The scanner must complete initialization but for some or other reason can not do so. Does the LED on the scanner light up at all?
Like mentioned doing the diagnostics could help...
Are you replacing the PCR rollers only?
Then there is the A3/ Ledger paper in the PC415/6 LCT...
Once had a customer claiming the fax is not receiving, so I sent a fax to the machine and it went thru no problem. Had to drive 200km to...
There was a spring tension issue that caused the waste box and transfer belt shutter that prevents spillage not to open all the way. That was on the A3 i series machines.
In that case removing both...
If you read through the entire thread then you will see that the problem was resolved. Long story short a tech used a blower on the IDS assy and damaged a stepper driver on the main board due to a...
I mean the SCDB connection to the control board to dis the scanner not just the ADF..
Same here. Seems to work fine. Been doing that if I don't have the right item with me.
Strange question but does the machine accept a print job in that 25% booted stage? Had it where the scanner caused the machine to hang there but it would accept print jobs so you should be able to...
The problem is that the toner is caking up, even if you replace the cleaning blade the toner will simply stick to the cleaning edge causing the toner to smear on the drum.