Search:

Deal all

I have problem with tray switchig on katana 1100 o Fiery EB 135 . I have PS file witch suppose to use two trays .One tray is defined as Plain paper , and other is bond . I set so on the...

I have lot of Jam 21 and they are all related to quality of paper , after long run machine is all hot and if paper is bad quality it fill jam at finger and cause jam 21 . You can lover Fuser...

Dear

At 1 milion You have to replace : Cleaning Blade B234 3564 and Brush B234 3590 , Filter B234 2158 , Both coronas and Grids , Developer ,and clean everithing ( See PM tables ) Fusing unit...

I have other things . MY mp9000 works fine , but all other katanas not , this faster one . My toner motor work I think . Is on yours machines motor was dead and didnt work at all or he was working...

I have same problems , I put new DEV units and Drum units and didnt help nothing , also try all this SP modes , and nothing . How did you fixed it ?

I I wont that transfer to transfer more toner from drum to paper should I increase or decrease Transfer current under 2 301 from 130 ? I try to put it on 100 , and 160 , but I didnt see any diference...

Toner rec. is off . I make changes as told . Now I have still poor density and VSP is 0.19 , and VT is 3.45 . That means that pattern od drum is OK and there is too much toner in the dev. unit !!? Is...

what do You mean under " toner dispens " . ? How can I check quenching ?

I changed Transfer unit also , and same problem . Ricoh told me that grounding of building is not good ????? And how then other machines work fine ? I am at dead end

Today I put new developer unit and nothing is better . Tubes are good , I cleaned it , and toner hopper is full . I alo set patterns during job to 50 , so machine check id patterns every 50 prints ,...

Dear All
I am Marin from Croatia and I have some problems with my katana . My Customer have 9 katanas ( 2 x 9000 , 3 x 1350 , 2 x 1356 , 2 x 1357 ) and they print telophone bills . Two 1350 have...