Facepalm! Try again.
Is it bricked?
Odoslané z Nokia 7 plus pomocou Tapatalku
Type: Posts; User: habik
Facepalm! Try again.
Is it bricked?
Odoslané z Nokia 7 plus pomocou Tapatalku
Scared to click on this link.
Odoslané z Nokia 7 plus pomocou Tapatalku
Please get a mask or make two from cotton and just swap whilst one is being washed and dried.
Stay safe everyone!
Odoslané z Nokia 7 plus pomocou Tapatalku
What a lot of tosh...
Can you count to 21 with both hands and both feet?
Sent from portable device using fast cheapset!
What a great opportunity to sell them HDD SECURITY package.
4 port Switch cost can be swallowed in the HDD SECURITY package. There you can have them being lazy and they can read the counter from...
Are you saying that the logic you incorporated into your robotic packaging system needs output from copier as count 0 ?
Why can't you just use the standard counter system that was developed by the...
Compare to the old TA8030 with 80 page/min with Selenium drums that lasted 5 million if maintained properly. Shame about the expensive cassette feeder rollers, only lasted 200k (as oppose to 500k)if...
You are correct. There is a new waste box type with modified inside spacers/ columns to improve waste toner flow. It will have a small round plastic nip on the back side distinguish from the old box....
It will, just need to modify.
I have a wild guess that your lasers are out of alignment.
If not the TR has broken black bushing.
Sent from portable device using fast cheapset!
Opt 1.
Try to play with timing.
Opt 2.
Try to use all three rollers in bypass with new ribbed ones
A5C1562200. Then play with timing.
Sent from portable device using fast cheapset!
What issues ..are you experiencing on your machine?
Sent from portable device using fast cheapset!
What's the mileage on the machine?
Sent from portable device using fast cheapset!
You mean like de-compile the driver? Or imitate the fax-driver?
Sent from portable device using fast cheapset!
NO!
Go to infohub!
Sent from portable device using fast cheapset!
Google translate does pretty decent job although I must admit I am still not sure what they really need.
I think it's a frustrated user.
Sent from portable device using fast cheapset!
Not that I know of.
Only charge rollers due to using new coating to prevent bubbling up.
Sent from portable device using fast cheapset!
Actually...can you refrase your initial question please?
Do you have trouble feeding from the manual/bypass tray? Left hand side.
Or
Feeding from cassettes? Under machine.
Sometimes...
100k is about right to replace the roller kit. Bet SEP roller is flat without ribs. Modified pick roller should have black colour.
If it doesn't feed at all...when you take the rear cover...
Even when using modified charge rollers?
Sent from portable device using fast cheapset!
.
What jam code do you get?
What is the life of rollers?
Replacing feed+pickup+separation rollers may solve the issue ... usually.
Jam code sure helps to pin point location.
Sent from portable...
Clean the duct system and the dev unit as well.
Sent from portable device using fast cheapset!
That seems like drive motor to me. I'd replace all of them, as they pop one after the other in matter of weeks or months. Before the change be sure the drive gears on the whole gearbox are running...
Copytech may charge you, but copytechnet.com may give you free advise.
Sent from portable device using fast cheapset!
Have you tried memory modules?
Sent from portable device using fast cheapset!