Change the Maintenance Unit , had 2 machines with similar issues. Life is 20,000 metres , changed units early at 12000/13000.
Type: Posts; User: liffy
Change the Maintenance Unit , had 2 machines with similar issues. Life is 20,000 metres , changed units early at 12000/13000.
Swop the pin and spring from the developer fill inlet . Will save you cost of a new dev unit !!
;) Machine fixed!!! After doing a Factory Reset on a similar model
, the first question after reboot is LANGUAGE, and it gave all the 6 pages of choices in english.
So if you get a similiar...
No nvram , dipswitch or jumpers on Controller PCB!! Probably just unlucky in receiving a Controller
with wrong Firmware .
Cannot get to any other machine functions till I choose one of the options,don't want to choose wrong option incase I permanently fix it in Chinese !!!
Fault was "Scanner Carriage Error" on display , have swopped Controller PCB, which has cleared fault,
machine reboots , shows "INITIALISING" then "Please Wait", then shows an option in CHINESE,
No...
I had similar problem got this help from from Mr Teckat, hope it helps
Under the limited functions tab now there are two pages for limited function. Be sure to check both pages.
It has been...
Had every IRC2880/3880 model we have showing the "insert black drum " message over the last week,
Cos we cant get the Dc Controller V61 software from canon, we have to fit an ITB assy,
thats...
Customer selling their onsite stock of Konica 1050 parts ,
to be sold all together , no individual parts,
Seller in U.K. , can deliver world wide .
Price ...... negotiable, make an offer !!!!!
Thanks Gents
Hi all
any one got an updated Parts Manual for saddle finisher w2 please
Only need the Atachment parts page , fig L01,
Looking for the "ski's" , latch bracket, and lower connecting bracket and...
Thank you very much for the info.
I had changed the values of TR-SP-C1 etc to try and eliminate intermittant faint copy problem ( as on ir9070/8070/105+)
All fixed now
Will not use Tray2 ( lower tray) at all , Every job exits on Tray1 ( upper tray ). If staple selected , paper exits out of tray1, no error , no alarms. Even if Tray Destination set to all output to...
Sorry , i have an Ir5075, with random E808 followed by E004 error codes... fuser , LFR and bearings,Fuser heater PCB , all changed........but intermittant problem .......any idea's ?????
Has anyone got any updated info on this topic????