The ricoh usa tsrc site has been stating there is a problem with some of the package firmware. Try again and use the individual firmware files in a romdata folder, as was suggested earlier
Type: Posts; User: jonhiker
The ricoh usa tsrc site has been stating there is a problem with some of the package firmware. Try again and use the individual firmware files in a romdata folder, as was suggested earlier
My best wishes for a safe return.
folks have a tendancy to lean on the left corner of the df... try adjusting that corner up
check for a pinched wire on the center thermistor. we usually do not have much issues beyond cleaning the thermistors and resetting the code
Thanks for the info. I have customer that this would work just great for them It is a small law office in a small town.
The State of Alaska used to, and may still does, give money to each of it's residents every year, based on oil revenues. It is usually not a lot, but people look forward to the bonus.
Yes, the quick copy can be changed to single sided. We also change these machines over to the classic screen.
agree with this. had one that had some damage to the door linkage on both sides, gave this image due to the LED array out of whack. had to re-align and then replacre the linkage.
The process and tools needed are used by and available for trained techs only. Call one. Or, risk turning your machine into a big plant stand.
SC5810 is for fusing reset and does not affect tray codes. 502 as stated earlier is your tray lift motor. i would say to swap it out
this is correct. there are probably chunks of dv blocking the dr blade. some folks run a business card or plastic mylar to see if the image changes.
I remember using netscape navigator and then IE, now i use chrome or fireox
My knee must be naturally magnetic, because it usually finds the dropped screw....
i also put something underneath a clip when it is tricky to get off as a safety net.
welcome! :D
I would strongly suggest scan to email.
If you have cleaned and did the PM on the PCU and developer, I suggest that you rebuild the fusing unit.
yes, yes, yes...
My Mac knowledge is a little rusty.. but when you do file print, select tray 2, then select the paper type to avoid the mismatch error. Then save it as a preset. Then when they need to print on that...
A local grocery chain we service has them and uses them for shelf signs of different sizes and paper types, generally not to many issues. Replace the PM kits as needed.
There was a pilot program last summer. Quite a few folks think they are a pain, but that is more to the riders. They are back, again.
Yes, people ride on the sidewalks and without helmets, etc, no...
After using many methods for aver 15 years, this is now my preferred method. I keep a small like 50 mb sd card in the tool bag that came from an old machine, might have had java or something on it. I...
If I am having this issue, I take the slit glass off the copier and then clean both sides, and then clean the mirrors underneath
i do come from that generation where we got vaccinations for all of the childhood diseases, as they used to be called. it was just normal. i get the flu shot every year, do not get any reaction to...
try unplugging the hard drive and then restart the machine. Does it ever throw a service code?