there is a sticky grit that will sometimes build up on these rollers that will resemble little black pills in the tray beneath the roller. when you are working with TPH you will often move this grit...
Type: Posts; User: Elle
there is a sticky grit that will sometimes build up on these rollers that will resemble little black pills in the tray beneath the roller. when you are working with TPH you will often move this grit...
have you tried cleaning the write roller? you might try swapping that out if cleaning doesn't do anything.
oops maybe i shouldn't have gone there..... 18599 and 18600 i just don't know how to adequately respond to that.
oh it was just a nightmare of update parts. i stopped counting the parts changes at around 25 or so. also if you are having K toner spew the fix is a cheesy foam pad that provides more pressure on...
im pretty sure its the same machine - when i was servicing the NEC IT color series they were just rebranded KM boxes and NEC shipped us KM consumables. it will likely still have the original KM model...
hrm well unfortunatly you are dealing with antique equipment. riso has never been very friendly with the mac OS so you might want to migrate your printing functions for this machine over to an old...
have you replace the dev. unit? i'd give that a try before goin too deep into it.
geees and i just moved from OKC....
i've used alcohol (90%) and clean cotton with good success - just dont rub too hard and wipe it again with a clean dry cloth afterwards and you should be fine :)
how funny i was just thinking that exact thing as i was looking the img over - aparently you were typing while i was looking
needless to say i concur wtih the labels assement ;)
you might try cleaning the HV contacts at the back of the IU cavity before removing all those covers. if that dosent get it then i would check the contact surface on the ribbon cable that goes into...
ink composition does vary from model to model to accomodate the differences in ink delivery systems. that said, the z type ink is formulated to flow through a small hole from the cartridge to the...
id say avoid the HC5000 like the plague, the 5500 is a lot better but still has some issues - we put these machines in print shops for the most part but some of our larger churches have them - the...
i just betcha she'll jam using 1 sided to 2 sided off the glass too. consider the eject mode difference between the feeder and the glass - odds are the feeder dumps face down and is using the...
riso shows you have 2 dealers in your area - pm me and i'll forward the info or you can search riso and find em
damage to the heat roller would be my guess, missin a lil teflon maybe. is it reprint or just smudges? samples are fun ;)
oh nice i had one o those a couple o years ago - had to replace the mechanical control board and update the firmware (dont forget to move the EEPROM to the new board if you go this route) run setup...
there is a new type pressure solenoid lever to help prevent this, see here for the bulletin...
thats what we're trying on monday
yeah and i spoke with tech support and they say the OS isnt listed in the specs so they dont have drivers for it so... we'll figure out something im sure
does anyone here know if there are drivers for OKI machines to print with the AS400 system and where in the hell does one find them?
we've seen very little effect here in OK biggest thing i notice is fewer service calls - almost as if the customers arent running the machines as much but we did a crash setup on 5 new models late...
and the laptops have it - i use a motoQ9 phone with internet access if i need to hit the web at a customer's location (technology rocks) and all my manuals, bulletins, parts lists, etc. are on my...
hehehe this should be interesting ;)
maybe a lil rational anarchy....shake a few tyrants from the trees jefferson style? and where the hell did our constitution go fer christ sake....
i'd love to say i'll vote for whomever will...