Just had the same thing.
Thanks for sharing!!!
Type: Posts; User: Raymondd
Just had the same thing.
Thanks for sharing!!!
I just ran across this thread TODAY, check the start date of the thread.
Thanks for the response! Unfortunately we have change all drum and dv units to no avail. Waiting on a response from our rep...
Any update on this? We have a FS6535cidn doing the same thing HV pwb did not rectify the problem (for us).
We have replaced fusers on 3 separate machines and all 3 counters have been reset to 0. Waiting to hear from Korea was wondering if anyone else has seen this...
(just replacing the fuser NOT...
Thanks for the response! Samsung rep thinks it's a firmware issue waiting to hear from Korea.
I had a tech go and change the fuser and reset the fuser count, the reading from a few months ago was 430,000 impressions now it has 7 total????
Any help is appreciated!
X10000
Do any of you guys have experience whith Square 9 software?
We are looking into it to replace KyoCapture, DigiDoc, and Documentmall...
Any other input would be greatly appreciated!!!!
I've had some issues with Bonjour being turned on??? In a PC environment...
YouTube - Dave Chapelle Popcopy Video:)
Hey guys,
Can someone give me the part number fot the top paper tray feed clutch?
I have 1 machine like this and I don't want to buy a manual...
Thanks
HELP!!!
I am in dyer need of a fax system M for a KM 3050/4050/5050
If any of you guys can help please PM me!!
If I remember correctly the machine should blow a fuse to reset the counter. The fuse should be located around the connector on the fuser. I think the fuse is a MCR-1/8 (could be wrong going off of...
Was the fuser u installed new?
Trying to relocate around South Alabama. Don't want to post too much info nAtion wide... Anyone interested PM me
Thanks Elle,
That makes perfect sense I'll keep you guys posted. Blackcat EDH electronic document handler, minolta terms old habits die hard. Thanks again everyone.
Thanks for the reply aabarnes1,
The sensor has been replaced twice. The problem is the 8030 will run copies from the target glass all day long. I can't get one out when using the doc feeder...
Hey guys,
This is a strange one...KM-8030 only jams when using the EDH paper exits machine and jams (finisher attatched j-81 without finisher j-60). This machine will run copies off of the glass all...
Hey Oyster,
My first guess would be trash in one or two of the dev units... Change the magenta and try.
Guilty!
Been doing it for years.
One of our sales ladies (I use that term lightly) showed me some copies last night that were skewed real bad. This is on a out of the box KM 5050. So I send a tech out first thing this AM to rectify...
You may check the scanner home position sensor. If I remember correctly there is a sensor on the front left and the front right...
I have had 2 8030s in the last month give jamming issues here is the cause...Mainly jam 81. The pic is terrible maybe I can explain
The metal plate that is circled has a small piece of sponge I...