do you have a flashing green led on the front as well? normally a sign of the main controller needs replacing
Type: Posts; User: canonclc
do you have a flashing green led on the front as well? normally a sign of the main controller needs replacing
Take the 3 way unit out and check the sensor arm has not popped out of place, very common on that turnaround unit.
Had company cars for 30+years , last one was a BMW 320d m sport but decided to opt out and buy a Volvo v90 Cross country. Company pays me £450 a month and fuel costs .
33 years http://www.copytechnet.com/forums/images/icons/icon9.png
looks like drum blade worn.
9 out of 10 times its the magenta dev assy itself,had this quit alot
Had the same issue on a pc ,customer sorted it in the end with a new driver
see his email below to a colleague
Hi Scott
Just thought I would let you know I have had another look at our...
Canon mcs allow you to connect via go to assist to the control panel of the mc with remote licence installed on the device (free canon license) you can also get into service mode.
main scan ,darn :(
no its out
had this about a year ago,turned out to be the loom on the draw to the fuser.try the fuser assy in another mc if you can.
the jam code is a red herring.concentrate on the error code.
also check the...
thanks,ill check the firmware in the morning.i guess if i switch cyan with another drum the problem should move to the new colour?
i have a 3550ci with the cyan registration about 5mm out,ive done about 30 manual adjustments and its slowly coming back.is there a way of reseting the mc reg back to default without spending another...
did you fix this ? Have the same problem
Glad you got it resolved
Make sure it's not a bottle from a 5030 and shine a light into the hopper hole where the bottle fits in and make sure there is no a square white tab sitting up at the end of the hopper.it needs to be...
Is it genuine toner bottle they are using? Had this problem with katun toner bottles.
no problem mate, have a good day
The tool is fixed to the hopper assy at the back of the mc.you will need the manual really but it fits over a shaft at the rear
on the hopper assy. You turn it and it opens the hopper door. If it...
Hi I need to configure meters on a canon irac7055 to show
Copy large bk
Copy colour bk large
Copy bk small
Copy colour small and the same for print.
Any ideas of the configuration?
Thanks
Did you cure it .I have an ira 6055 with e197 -008
Thanks for the info.checked the gears and they were all ok.canon support rep is coming out on thursday to take a look and a third finisher has been ordered.just hope its not a build problem from the...
Yes works fine in every other way.just booklet printing errors on both k1 finishers.
Yes print or copy from the glass is the same error.when the shutter assy in the booklet maker moves to accommodate a4r paper it errors mid way through copying just before the paper is folded
Take it thats a no then .darn I was hopping you would know the answer