Replaced BICU and we now have a working machine. Was replaced by another tech so not sure of what he did for counters
Type: Posts; User: iambeetle84
Replaced BICU and we now have a working machine. Was replaced by another tech so not sure of what he did for counters
Thank you for the replies. The controller for this model doesn't have NVRAM chip. I tried running without controller box also with no change. Have a BICU coming in from hytech to check.
Machine comes on with a blank display. Power light is on and customers are able to print to machine. We have tried putting op panel on machine we know is working, op panel works on new machine. We...
does anyone know if this finisher can fold WITHOUT stapling? we have a costumer who wants to fold patterns and ricoh has no answer for us.(go figure). and does anyone know if (the i dont know wth...
crap... put in wrong forum
does anyone know if this finisher can fold WITHOUT stapling? we have a costumer who wants to fold patterns and ricoh has no answer for us.(go figure). and does anyone know if (the i dont know wth...
we have a mpc 7500 that is getting the same jam, but it is getting caught in the front of the fuser. we have changed all the parts in the exit of the fuser. even put in a new fuser($1775). still the...
has anyone seen any issues with 8.5 x 14 running thru by-pass? have a customer wants to do this but jams everytime. even with programing size. thanks in advance.
update... tried new main board, sensors, liftup mech. flag for paper sensor is working. swapped trays. checked the wires. still have issue...... our shop guru, has been going and is stumped. what...
yes, just grind off corner. I use my pocket knife. I have never had any customers question what im doing.
I agree with Zed... we never has those issues before machs were upgraded and now it seems once a week we're getting calls for sc500
yes they are the same.
I know where the paper end sensor is. maybe I didnt say it clearly... I swapped that sensor (the one located above the tray, with the black plastic flag that hangs down to pass thru the lift up tray...
swapped sensors from rear of machine...no change.... gonna try the main board and new sensors.
i have a mach that isnt switching to tray2 when tray1 is emptied.. tried new sensors, switching trays.. when tray 2 is (default) emptied, it will begin to pull from tray1. but not vise-versa. when...
when making double sided copies, front side is perfect, second side is crooked and getting creases... going thru fuser is fine but when sheet stops it is strait and gets pulled back in for next pass,...
looking for a parts list for sr5000 finisher b830, please help, thanks
checked the wires, there were rub marks but not worn thru. taped up, no change..the biggest problem is that i dont know if the boards i was using were any good to begin with, our copier 'junkyard'...
pulled duplex off, still same issue...think maybe we're sitting on a large boat anchor
fuser already out and drum, just wanted to see if it would go into sc code. the only thing (option) left is the duplex unit plugged in. thanks will try that also
working on machine with no power, when powered up main power lite flashes and goes dark. pulled out controller, main pwer lite stays on but goes no further..tryed replacing main pwb no change. tryed...