Can you enter a Head Rank ID through the control panel. I see the listing in the service mode operation panel but can't change input data for new head.Thanks!!
Type: Posts; User: Bopper
Can you enter a Head Rank ID through the control panel. I see the listing in the service mode operation panel but can't change input data for new head.Thanks!!
Canuck,
Thanks for replying and I finally repaired E578 code. It ended up being the connector splice from the transport assy to the board, reseated the connection where the wires meet and it took...
Machine never reaches standby state, bins start to move then stop and e578 code.
I have a Canon finisher on a 7105 that has a E578-8002 after blowing the copier option power supply. Replaced finisher controller, M17, transport belt HP sensor, power supply with no luck. Any ideas...
I tried all previous ideas with no luck. I did finally fix it by removing the registration sensor silencer, it was sticky resulting in a delay. Thanks for the help!
Having a problem with Z folding at the registration roller and jam code 0106. Replaced registration clutch and pre-registration clutch. Machine seems to work fine through manual bypass. Swapped...
Can scan in image to mailbox but start print is not highlighted when wanting to print
Bizhub C652 prints a test page OK, prints a small inverted image in upper left corner of document, file prints fine on our shop machine, can anyone help.
How do you turn Multicast Discovery off
5570 drops off line after a few prints, restart spooler and prints a few more, all HP printers at this location do not drpo off line.
Anyone seen this.
Can anyone send me the latest version firmware