Sticky foam on electromagnetic clutch paper feed
Type: Posts; User: _SuabE_
Sticky foam on electromagnetic clutch paper feed
You need to download firmware
Good luck
Hope this will help ( DepositFiles)
Cheers
Initialize the NVRAM
the worn out ball bearing of the pressure roller creating the noise just replaced it then do a reset error
ink sensor cannot sense the ink, check ink or ink sensor, or ink is blocked even inking has performed
Check your ink pump, and ink hose it is clogged or the ink supply outlet inside the drum is clogged. If you noticed it will keep on initializing the ink then it will stop then, giving a no ink...
Please see your message
Replace the RAM
Welcome Back Peter
settings
network settings
log in as
username=admin
password=admin
connection type = wired
configure ipv4 settings
update
reboot
Is this a colored drum? if this is a colored drum, dip switch is not set to the proper color, or the ink color is different from the setting of the dip switch
Is the carriage assembly running smoothly during initialization, no tilting movement during home position? Is this problem comes out after carriage belt replacement? if it is check the carriage belt...
Check scanner data cable connection (clean) renew lubrication and clean optical.
Bad idea Be HONEST anyway..
I do have the firmware
cheers!
Anybody experience this on Kyocera Machine especially TASKALFA 3500i
FAULT
No Display as in no power but scanning lamp is on
Heater not turning on
What should be possible causes?
Already checked...
Shinu hal? What happened any news?
Just Clean the Optical path, mirrors, etc.
regards,
Ike
Check the orientation of the drum if it is in home position exactly, this is common error in Riso GR models, the misfeed during master clamping because the drum is not in his home position, check the...
email me, what you are looking for is with me....
RIP
Do you have another machine Bizhub 751 working? it will help.. to format the CF, i can show it to you remotely on your pc..
First what printer did you connect? showing a new hardware found Canon MF4370, this means the hardware detected is compatible with MF4370, you should continue installing, did you cancelled the setup?...
try to use MF4150_FirmwareUpdateTool_V062, available on Canon Eu website..