Search:

thanks for that but already done that

Hi guys,

please assist,i have the named machine and cannot scan to mail even though you get connection test successful both for smtp and dns,upgraded the firmware.

Any ideas?:confused:

Guys,

no shady deals just had an mp4002 that the controller is dead and i had an mp5002 controller just thought it could work,thanks for your input

Guys,

hope you are well, what do i require to convert an MP5002 to an mp4002 or vice versa as the Controllers are different:confused:

hehehehe!he should listen to himself and probably he will come to some sense of communicating, he seems to be disturbed:confused:

Anger management class is a good idea i guess:)

Login to special service mode (the one with 143) and execute SP 5-846-046. This will reset all password data and btw all address book data.

Replace the laser unit

Guys,

i was able to resolve sc995-04 but stuck with sc555/542:mad:

Hi Slimslob,

thanks for the response,

i have even replaced the fuser unit,ac control board,power supply board,iob board,thermopile, replaced bicu and eeprom am stuck with sc995-04 i cannot...

I have replaced the thermopile,ac control board,iob board,power supply,fusing unit and the sc code keeps on coming back, i decided to replace the bicu and eeprom and i'm stuck at sc995-04, i cannot...

Hi All,

i have replaced an eeprom on a mpc5503 and cannot be able to write the serial no. on sp811-2, giving error SC995-04,

How do you set te serial no.?



SC No.

Dear All,

kindly assist before i proceed on incuring expenses,i have a new above printer with the sc 555/552,replaced the fuser unit but it still is persistent.

please can i have your learned...

Hi guys,

i have this machine giving the above code,i have fitted a new fusing unit to no avail,any ideas will be appreciated

hi zeldaman,

the creasing is only at the fuser level be it single or double sided copyiing.

just creases and folds will attach the copy later a did a quick fix i hope it will work, increased tension on the registration rollers.will update.

Dear All,

i trust that you are well. kindly assist on this issue.

the above machine has been creasing copies in the fuser section, i have changed the fuser unit though the machine has done only...

check your charge unit i believe it is arching,its giving an SC300

Thank you imprestik!

i had not upgraded the firmware was going to do at the customers site even before the said happened,

i'm going to check the same and update the findings:rolleyes:

Good morning all,

kindly assist as i installed this machine with first a wrong finisher but re[placed and worked,the problem i had was i could not set up the machine with the web browser as i get...

woow!
thanks tinnyjay,
please clarify as i went to ip4 and set the ip and subnet mask on the system-interface settings and the same to fiery i set the same ip but did not on the server as the site...

hi tiijay,

i have gone blank with the drivers for windows 7/8,

kindly assist with the drivers for printing if you can i don't know why its not printing though i can ping the machine and...

THANKS tinnyjay,

will try that and let you know,
thanks again

HEY PEOPLE!,

sorry to ask but this machine i bought in german language and can make it print nor scan!

is the firmware update to change the language G1785980B?
KINDLY confirm as dont want to...

Hello to all,
seen a strange problem both motors for press. release lever and the web motor continuous on when you switch on the copier,any ideas on what the heck is wrong,i have replaced both the...

thank you for the input,found the fault which was the web was becoming loose causing the feeler activate the sensor that it has run out