maybe i'm just not getting the joke but are you seriously installing a third party app that collects information on a customer's network? that sounds like a serious violation of security to me. also,...
Type: Posts; User: ryanb
maybe i'm just not getting the joke but are you seriously installing a third party app that collects information on a customer's network? that sounds like a serious violation of security to me. also,...
How did the conversion turn out?
I'm looking into this myself with the new Remote Connect service we are thinking of converting some of our 03 units from the "legacy" panel to the SOP either V1 or...
I attempted to, but not being familiar (I've only worked on Ricoh/Lanier and some HP for the last 15 years), I wasn't able to track down where all the sensors/switches were that I needed to trick and...
I work for a Ricoh/Lanier dealer but one of our customers recently inherited a Canon ir3570. It was working fine for a few weeks then started to make a grinding noise from the fuser area. It's quiet...
just wanted to follow up, as it seems this thread's gone quiet...we've been finding that replacing the belt and cleaning the ends of the heating roller (build up on the ends under the bearing/plastic...
it looks like they updated the manual, it now states SC553 as "Heating roller...overheat".
we took 3 fusers, two bad and one good, and swapped parts around to see if we could see changes in the...
if you can convince whoever's in charge to do so, maybe you could employ and assign user codes and lock the machine down? then just track the user code?
I need to amend my post in regard to the technique of removing the coating. don't use a knife/scraper (unless you have to).
I've found that a Scotch Brite pad and some alcohol (rubbing, not drinking...
also, has anyone found a supplier that sells the charge roller assemblies?
sorry if i missed any info in the previous 11 pages of posts, just a little pressed for time...
has anyone tried modifying printer PCU's to fit the MFP's? (or any other printer parts for that...
thanks for the info, guys! i had tried a few "chemical" approaches but nothing we had here seemed to take it off, i'll see if we can get the mentholated spirits. i know the "knife" can put some...
ok, crazy idea, i've been doing this a couple months now and so far no problem...this only works with the "green"-ish charge rollers:
take the white cleaning roller out, then carefully, VERY...
right, we do that too...sorry, i was trying to be brief to get the thread started but i'll be more specific. the machine we recieved had no drum/development units what-so-ever, like there was a...
sorry, i was thinking along the lines that those drum units fit in most of the current Ricoh line, (25, 30, 35, 40 ppm) but specifically they went into a Ricoh MP C2500 (Gestetner Dsc 525, Lanier...
so, we bought some used equipment and one of the color copiers (Ricoh) came in without any PCU's in it. being familiar with the mods and all that i figured it would be no big deal to put the printer...
Amen bushcrafter, for us the 1224/1232 were the BIGGEST pieces of crap ever! we only sold 2 of them, then pulled them and had to roll our customers back to 3800's cuz they were all we had available...
hope this is still hot. i could use the firmware too. thanks!
ryan@aos-corp.com
okaaay... i'm sure they get told not to do lots of things but that doesn't mean there isn't a way to do it and make it work.
we gave it a shot with the SPC PCU's in an MFP, as you said, cutting off the New Unit Detection. i've got one in the field installed just last week and the yellow toner said it was empty just a...