Thank you as well. I will check this out tomorrow and report back soon.
Type: Posts; User: patterson70
Thank you as well. I will check this out tomorrow and report back soon.
Much appreciated. I will go out tomorrow to look at this hinge.
Hello, I went on a MP 402 call yesterday and there are two problems:
1. The ADF is bending the originals in both of the leading edge corners. Please see the picture attached. You can actually see...
Ok, thank you, losing the printable view is unfortunate but I see there is no other way to solve the issue. Such a strange problem. I studied programming a long time ago and the fix must be a bear to...
Is it me? Can't get it to work. It used to.
This reminds me that the WT door did seem to be messed up and I had to kind of force close it. Like it had come off the hinge. Not sure if the customer broke it. Could that be it?
Thanks to all. I will be there next week to try these fixes and will let you know how it went. Cab anyone tell me why this happened in the first place? And have you had it happen as well? I'm afraid...
Hello, Recently I had a MP C4503 call with an SC422. I removed the Drum Units and Transfer Belt and vacuumed out some very light toner spillage inside.
The code went away and stayed away during...
LOl! Well permit me to maybe help. I do remember reinstalling a spring that had popped off, I think it was what GIUBOSS had suggested. That is: "Open the front door and check under the steel register...
I found one so no need to reply.
Hello I have some Xerox Versant 80 / 180 toners for sale.
Please pm me if interested.
Hello I’m looking possibly for a Ricoh SP 8400 HDD Kit Type P3 I think it’s. Anyone have a good deal?
Thank you for this. I will check into this. Thank you again.
Oh, I tried google translate and it worked! However, he did not read my information completely.
See below:
You can install hard drives (model p13), 320GB or more, 500GB or more
Turn on main...
Thank you but I can't read this!
Thank you, I did not know that about the 2GB, thought it was all for printing!
They are Adobe PDFs.
No, it splits the documents on it's own.
Not sure what you mean, he tells the driver 10 sets...
Thank you. I did look into this but the DIprint setting being too low would result in the job being reprinted. In this case the job is being split up. So lets say 10 sets, it will print half of the...
Hello, could you tell me why you said the MP 301 was a POS? Leaking drum units? Leaking hoppers? I have had those issues. They improved the newer drums I think, they don't leak anymore that I have...
I meant to say that the customer actually purposely set the printer to input the separator sheet because it will let you do that at least. It has not effect on the splitting of the sets. It will...
Hello, it turned out to be a very small piece of the pull strip that was left behind when the pull strip for the Cyan unit was pulled out.
I found it by separating the drum from the developer unit....
Hello and thanks to everyone for these suggestions. I have texted my customer - who is far away- to see if he can clean the laser glass under the cyan unit first.
And if that does not work then to...
Hello this Ricoh SP C440dn has brand new Color Drums and a brand new Transfer Belt and Transfer Roller Unit. Fuser look great.
Machine was doing fine until it was moved by a customer.
Now it has...
Well very strange, I pulled the machine out of where it was and set it up at my office and it prints 11" x 17" fine. No issues. I used tabloid as the paper size as there is no 11" x 17" size option...
Is the loose connection more at the display? Maybe the machine gets rough handled and the cable loosens up there?
If so then you have to remove the display to get to it?
Thank for this. I was hoping someone has had this code and it turned out to be a loose connection.
As a matter of fact, has anyone seen this error code at all?
And if so was it a board or just a...