About 10 days ago one of my 7095's started misregistering - at first it was intermittent, a couple of sheets in runs of 1000+ and only a small amount - 3-4 mm in the direction of the feed - last week...
Type: Posts; User: cedarstreet
About 10 days ago one of my 7095's started misregistering - at first it was intermittent, a couple of sheets in runs of 1000+ and only a small amount - 3-4 mm in the direction of the feed - last week...
As Phil mentioned there are previous threads regarding print heads going out - because I "introduced" the idea of reset devices into a thread about a week ago, I thought I would weigh in - yes they...
I have a 8400 that went through a similar issue - bought it because the previous owner needed 2 new heads and new ink - he always used canon inks - I found a gadget on ebay from china that "resets"...
referals please - I have 2 7095's and they run beautifully - there is a gear on the back side for the multi-feed drive assembly - call out #10 on figure 264 in my parts manual - it broke once before...
This doesn't look like a turrent drive issue -I just replaced those gears on a c1 last week - normally that is seen by banding in screened areas and a growling noise as the developer assemblies...
HELP A HUSBAND IN NEED!
My wifes office just got a ir5560 as part of a corporate acquisition - after 3 weeks it finally will print 8.5x11 from their computers - no envelopes, no legal, no color -...
If you are still looking for one, I can pull it out of my parts machine - $125+shipping your number or mine - ron - mailstore@cedarst.net
Finally after a month+ I'm back - schedule + family issues put this on the back burner - I have some large jobs now coming up so I had my service manual out over the weekend - 2 years ago I had had...
have a puzzler that maybe I'm just to frenzied to think straight on - OK, I'll be honest, I'm looking for an easy fix because I'm booked solid!
On wednesday I shut the 7095 down at the end of the...
Great!
Thats what I needed confirmed - that only letter size transparency paper will run - any other size transparency is not an option and there are no internal changes or "arounds" that can be...
Thanks for the quick reply-
The transparencies I normally run on the C1 have no white strip - I would only speculate that the machine somewhere setting wise is set to only run letter size...
Just had a customer ask if i would print on 11x17 or 12x18 transparency - suprised me to find that it won't allow that option and setting the bypass for regular stock causes it to jam because ? Not...
OK - thanks for the direction - I will address tomorrow and reply back - the day has started and customers are demanding
ron
Absolute apologies - my coffee hadn't completely hit-
the code was 0061-0010
I did try a new pink sensor cable as I have that as a stock part - looked at my service log and the last thing I did to...
Good Morning All-
We have multiple C1's - I now have a nagging error of E0060-0010 - My manual says to"turn the machine off and then back on" -
I've reset the error in service mode and . . . ....
I have multiple t-1 fierys - from machines that I've upgraded to q2 - email me for a phone number -
mailstore@cedarst.net
CONGRATS!
I think the 020 errors are the toughest on the C1 - I too am a glutton for punishment - I have 4 (yes 4!) they do print great and with some knowledge and service they daily make money -...
I would suspect the plastic spatter shield on one of the developer units is deformed causing it to drag on the drum as it goes around - I would also force stop and pull the drum unit and inspect the...
I agree - probably cyan developer - sometimes I have luck running the contaminate out with 20 solid colors prints - usually just cut my losses and dump the developer. contaminant could be as minimal...
Hope this helps-
We had a similar problem 1 year after getting our NEW C1+ 4 years ago - it started faint - got continually worse - the machine was under contract, so we recieved replacement...
We have 2 xerox 5050 as customer walk up machine - with continued "honesty" prevailing - customers are "forgetting" how many copies they make. We previously had a Hecon RCC on a minolta and would...
send me a picture - I have 2 dc12 I'm going to scrap and I'll send the the parts for the cost of shipping
ron/mailstore@cedarst.net
I have 3 that we have upgraded to q1- how would $200/each sound?
ron
in colorado
An appeal to knowledgable techs-
we have 4 canons - - a 7095 - 2 canon c1 and a c1+
Canon has determined that they cease to support them in our rural area as they feel it is not cost effective - I...