The fuser was brand new I tried . The machine only has 20k total and the paper is set too plain .
Type: Posts; User: apcrap
The fuser was brand new I tried . The machine only has 20k total and the paper is set too plain .
I have a c7030 thats smearing when running high color concentration solids . I changed the swapped out the fuser the problem is still there . If I run it ltr-r its fine but the customer says its a...
Been fighting this problem I just replaced the black dispense assembly and black dv assy with no luck .The machine will run about 100 prints before it codes out .Any suggestions ?
I have a c8045 with too much yellow saturation so far I replaced yellow dv assy , swapped out drums and updated firmware . I performed a copier/system nvm initialize only no change if run the procon...
Nvm IOT initialize fixed the problem
Working on this machine for washed out copys and prints . I noticed the image on the transfer belt is nice and bold(test print 12 ) which is leading me to a 2nd btr transfer issue .The second btr ,...
Its all fixed the the hvt in the transfer unit fixed the problem
Have a v80 with a banding issue 70mm from the trail edge that doesnt move only running black . All drums , dv units , 2nd btr assy , transfer belt , cleaning unit , 1st btrs with holders , upper...
did the forced alt and disable what nvm to initilize ?
removed shutter including the arms and springs no more code thanks guys !!!!
no I have not but the rap is saying nvm corruption
i have a 7970 with a code 341-310 that is appearing when print jobs are sent not all the time .The print job shows processing than than the machine just reboots than the remaing jobs will prit out...
i left the shutter springs on just removed the shutter too see if the cide would clear
I have seen that but it's not giving the polygon motor code .
I have a machine with a sc 293 that wont clear . The laser shutter was removed ,updated firmware, shutter motor turns in IO mode . Im thinking IO board or BICU .
after viewing the address book they set up the fax numbers with dashes - I removed the dashes it works perfect .
none of the speed dial contacts will fax if you key in the number it will fax fine imgoing to update software has anyone seen this ?
I ordered the upated contact on the frame I noticed a bunch of paper dust in the dv unit I cleaned it all out and did a toner s the copys look a lot better the customer is running report brand...
thanks alot ill check that I wonder what would cause the dv cylinder to get lines after replacement . The lines are noticed when copying or printing on gray scale .
Getting lines on the dv unit these lines (voids) are showing up on half tones . The dv assy was just replaced a week ago and the lines are back is there any issues with these dv units ?
i HAVE A WC 5335 THAT CRASHED HALF WAY DURING SET UP ALL LIGHTS STARTING FLASHING IT TURNED OUT TO BE A BAD MEMORY DIMM . THE MACHINE NOW DISPLAYS REPLACE TONER .
TRIED ANOTHER BOTTLE NO CHANGE...
i replaced the power supply it fixed the problem
working on a savin 2575 with a sc440 code . I checked the drum assy , transfer unit and everything spins smooth . All 3 paper drawers wont lift , checked all fuses on power supply and checked main...
I have a c3500 that keeps jamming while stapling in the finisher sr 790 . I replaced the stepper motor that drives the paper to the stapler , junction gate solonoid and cleaded all rubber rollers ....