Good evening.
Today I was sent to a Canon iRA DX C5860 that had feint prints & copies.
The first thing I noticed was the control panel was saying that the C, M & Y toners were low and would need...
Type: Posts; User: stickfly
Good evening.
Today I was sent to a Canon iRA DX C5860 that had feint prints & copies.
The first thing I noticed was the control panel was saying that the C, M & Y toners were low and would need...
Good evening,
Today we had a call from a customer regarding his new DX3835i with AE1 Booklet finisher that was delivered 3 days ago.
One of our rep's got him on a video link and sure enough as the...
Well another 4 58** to unbox and get ready for delivery today, all 5850's.
3 were having finishers, 2 with AB2 staple finishers and 1 AB2 Booklet finisher.
The first machine fitted with AB2 staple...
Good evening (In the UK),
Has anyone here had the error E000720-0001 after fitting one of the new A1 finishers to a c58** series.
I've now had this after fitting the new A1 booklet or staple...
Problem solved.
As you look at the copy exit area from the second delivery unit you will see 3 metal arms above the second delivery unit.
These 3 arms are supposed to hold the top of the 2nd...
Good evening,
I have today unboxed a new iRA 3720 and have been getting it ready for delivery tomorrow.
The problem is that it will not duplex properly. I have managed to duplex on a couple of...
Thanks for your answers but I already have the mylars, they were delivered last week. I just cannot remember how to get to them in the machine, what do I need to remove. It's been a couple of years...
Good evening.
I know this is now an old thread but can anyone tell me how to get to the mylar tabs in front of the registration rollers.
I have to change them on a machine this week.
Regards ........
Hi Kenny,
I've just sent you a message regarding this issue.
Regards ...... G
No I didn't think to try firefox. Will try that next time I go there, thanks blackcat.
Regards ...... Gary
Thanks nathicana but Yes I tried that.
With my laptop connected directly via a crossover cable I can look through command centre until I try to log in. I input the user Admin then the password Admin...
Cannot get to the bottom of this.
I have an office with 1x Taskalfa 3253ci and 2x Taskalfa 307ci.
Got a call to say they had problems with both the 307ci's going offline so out I went.
Once there...
Thanks for the reply,
The HDD was new, I did a Logical format after installing.
The firmware is the latestl
Regards ...... G
Thanks for the reply but I have looked through all the UK bulletins and can find nothing about these error codes.
Regards ..... G
Hi,
I attended a c258 with error code CD011 & had to switch the HDD off so that the customer could carry on using the machine.
I returned with a new HDD (320G) & replaced the faulty HDD (250G). I...
Simple really ...... I know the cartridges are different for the 3011i and the 3212i but do they contain the same toner inside.
Two of our customers have managed to put 3011i cartridges ( TK-7105 )...
I've got one doing exactly the same thing!
Tray 2 only, with the pages having the exact same fold in the middle, even after new fed & separation kit : In fact the customer is saying that it didn't...
Hi,
Have a customers machine giving an error when he tries to scan a large number of pages. The error is : "The job has been deleted due to insufficient memory" displayed on the C227. The machine is...
Hi,
Yesterday I tried to log into the web interface on a Taskalfa 356ci to check the network settings. I did this with my laptop connected directly to the machine using a crossover cable as usual....
In mkweick's case it sounds like the clue is in the fact that the 2 machines cannot be used after the As400 server reboots.
Are the 454e's set to static IP's or are they on DHCP?
The fact that...
Hi,
I've got to look at a Bizhub c364 fitted with a FK-511 in London tomorrow.
The problem is that when a fax is received the machine fans start up and the machine is receiving the fax but nothing...
Hi,
I fitted a B1 inner finisher to an ir2545i today but the B1 does nothing. It just sits there in a dead state and the paper fed just jams against it. There is no drive in the unit, nothing.
Do I...
Thanks Habik,
Can you give me a part number for the modded roller please, I cannot find a bulletin regarding this.
I have looked at the parts manual but cannot find a roller called the Duplex Eject...
Gotta look at a 5500i with jam code 4303, has anyone else had these jams. I know from the manual that it's a duplex jam ( Dup sensor 1 ) but wonder if there's a known problem I've missed.
Many...
Hi,
I have a Canon ipf8300 with the following error code : 03830113-2525
this is not in our service manual and our Canon UK rep's say they do not know what it means.
Can anyone help us on this...