I found the loop tucked into the harness on CN12. Looked like somebody put some effort into tucking it in the harness -- odd. Was greeted with an L8-20 after cutting the loop, which was cleared by...
Type: Posts; User: AnthonyH
I found the loop tucked into the harness on CN12. Looked like somebody put some effort into tucking it in the harness -- odd. Was greeted with an L8-20 after cutting the loop, which was cleared by...
This machine has the single fan located above the cleaning ass'y. I'm not sure if these came from the factory this way in 2006 or not. It does not have the dual fan upgrade of the more recent models....
Thanks for the replies, guys. All of the fans check out okay and were swapped out with working fans from another unit, so I believe it's an incompatibility within the harness that isn't correctly...
I'm working on a customer's copier that has a constant L4-31 that showed immediately after the copier was updated from firmware 2.08 to 2.10. I have swapped out all 3 fans related to the error,...
Hi all, I've got a problem with a machine I'm not too familiar with and hope someone here could help me out. It's a DP-4530 that will quite often restart itself, saying nothing but "Scan Disk" on...
Hi, I am wondering if any of you Bizhubbers have ever had a problem where the machine will not continue the job if it runs out of paper during that job.
The copier will run out of paper, come up...
Well, I think I can safely say the problem is fixed. The FS-9520 had copier toner in it, so that was fairly straightforward. The copier had the belt that runs from the motor over to the bypass drive...
That is an interesting thought since the KM-5035 and FS-9520 use toners that look very similar. I am pretty certain they have the correct toner in them, but I'll have to check again before tearing...
Thanks for the reply. So, in your experience, when the coupling gear gets worn, it will cause the solenoid to click in two second intervals? Most of my copier repair experience is centered around...
Hi, I've just recently begun servicing Kyocera machines and have run into a problem with a persistent add toner message on a 5035. The display stated it needed toner so the customer put a new...