Friction pads then move to the clutches.
Type: Posts; User: pfinn10
Friction pads then move to the clutches.
Haven't worked on the 8600. but worked on the colorqube 8870, 8900x. When a customer runs non genuine and the CQ starts to fail easiest thing to do is put genuine ink sticks in and run full colour...
havent used a 350 so not sure if it still has it, but if you goto job details. Does it tell you what the error was? login error? server connect error?
thanks for your help. Been trying those things but no success.
been talking to Xerox Australia tech support. All there machines worked fine but we noticed they were running an older firmware...
Im just using the router DNS (192.168.1.1), which works fine on my ricoh's and other xerox's i have smb scanning on the network. For an smtp server i use mail.bigpond.com which if i had a dns issue...
thanks for the reply.
Its the latest firmware on the machine. I've tried and failed using win7, server 2003, and win xp. All fail when it comes scanning to hostname, but ip is working fine.
Ok,
Got a few of these to install im just having an issue setting up workflow sanning (smb), If I use the ip address of the server/comp with user credentials It goes through fine. but as soon as I...
depends what the error is, what does it say exactly on the screen when you try to scan to the folder?
The error is Black TD sensor.
Check toner supply (can be done in 5-804 output) make sure Toner is getting through.
Try a new K PCU (dev unit included).
Check to make sure you have the Toner...
try to pull on the front left of the scanner section in an upwards direction (grab the front left corner of the machine and try to bend it back into place.
was browsing for something like this just a few days ago.
much appreciated
any chance you can post a scan of an image with the lines on it?
Had something like this awhile back, Tried boards, new Fuser units etc. kept thinking had it fixed, kept coming back 1-2 weeks later. Ended up been fuser drive giving issue. changed motor, clean...
I use eprint on my Ipad + iphone to print to a MPC. Its about $2 in the aussie app store. Its basic a driver, but it works.
doesn't work host name but works IP, normally means you don't have a working DNS entered. Host name can be found in apple, system prefrences im pretty sure.
Have you tried just browsing the exact shared network path? \\computer-name\scans so enter that or whatever the shared path name is into the folder path and press browse see if your login details...
have you tried running it while cheating the finisher door? it might give you a better view of what's going on inside.
Can you manually enter the size of the com10 in custom size?
also im guessing you're printing from WORD? if you are have you tried changing page setup (so it looks for com10 envelopes)?
EDIT:...
thanks for the suggestions.
i've tried doing the settings teebee suggested, after changing those SP settings, and giving the thermopile a good cleaning. i've tried it on some of my problem...
I've read that you can change supervisor if you go into Factory mode, haven't had a look myself. (Not SP mode), otherwise you're probably gonna have to replace NVRAM. let us know if you need help...
thanks for the replies.
I've tried thicker stock with pretty much the same results. doesn't do it all the time if i did a run of 20, only 3-4 of them would have the fusing issue.
Ive tried...
Got this issue on some of the MPC 5000s i've got out in the field. Some customers are complaining of toner rubbing off the page when doing heavy colour bleeds.
The paper is just plain 80gsm
I've...
Any one have any idea?
I've tried
K Drum units,
K Dev + dev unit
Transfer units
but i keep getting this crap?
Customer uses user codes (management) to keep track of copies/scans etc. The technician removed the HDD (the back one) and put it back in and now i've got no codes, is there anyway to retreive the...
Any Chance someone can help me get firmware for a bizhub c200 . Mostly for scanning / system so i can smb to win7
pfinn10@yahoo.com.au