Search:

Have anyone used another media type outside the recommended media (Verso Sterling Premium Digital 100 lb. Gloss Text 148 g/m2) for color linearization that you have seen works well?

It happens on all trays.

Thanks for the information. Yes we have confirmed that the side guides are set correctly in the tray. We have used the blue lever to confirm. Same issue. Im headed back there today and hopefully we...

Has anyone dealt with varying skew. The machine has 200k on it. Its and all its options are leveled. There is no IQ on this one. We measured the paper to make sure its straight. Some times it DEAD ON...

Has anyone dealt with this? Any help would be greatly appreciated.
The machine has 200K on it. We have checked the connections to the 2nd transfer unit and we have followed the KB article "Color...

ok thanks I give that a try.

I know its been awhile. Where you able to find out what caused the issue.

There is a black LFR that helps but doesn't resolve it completely. We found that after dong a color linearization (max density, density balance etc...) that helped as well. So with both combinations...

Its been some time since the original post. What did you come up with on this problem. I have a similar issue.

The bands are very close together. On an 11X17 page you would see probably 10-15 vertical bands. If you panic stop the machine you can see the bands on the belt. The bands are clearly noticeable on...

Ill head to the machine tomorrow and will provide feedback.
Thanks

I have this issue. Did you get this resolved.

Did you get this resolved?

Did you find out what the solution is? Is so please advise.
Thanks

Thanks for the info, can you provide a part# i'll look into it.

If you have worked on the C8000 you probably have seen this issue. Its becoming a big problem with many C8000's here in Houston.
Does any one have a tip that can help. Some techs have replaced fuser...

Just curious, what solved the issue. This seems to be a normal occurrence with the C8000. Tech support doesnt seem to know exaactly whats causing it either.

Any info would be appreciated

Its been a while since your post. What was the solution?

Thanks all for the ideas. Yes the issue was in the fuser. The lower belt assembly was binding slightly it seemed ok but when compared to a new unit it wasn't.

I got a call for banding today. When running test pattern 53 at 100 and printing out individual colors the bands show up. The bands are at the same distance from each other and are moving (pattern)....

Hello,

Any updates on this issue. We have four machines doing it. It does appear to be an issue with the toner though.

Please advise.

I have a similar problem. Did you resolve your issue?

This issue turned out to be the ribon cable that connects to the stapler unit in the front and runs to the back of the finisher.

I have this issue on a Fs-514 mounted on a C352. Did you resolve this issue? Please advise

The machine will print all day but codes when the RADF or copying from the glass. The previous techs replaced the Image Control board, the exposure Lamp & Lamp starter. Any ideas? Im thinking the CCD...