Hello every body. I finally fixed that error. The Main Bord had a short circuit with the diode that controls temperature. I found this becouse i sent the board to a eletronic tecnitian that's a...
Type: Posts; User: burncrauder
Hello every body. I finally fixed that error. The Main Bord had a short circuit with the diode that controls temperature. I found this becouse i sent the board to a eletronic tecnitian that's a...
Hi James,
How did you menage to fix the e202? I'm having some trouble with this error at a iR9070.
Thanks,
That's the problem the fuser isn't heating. When I turn on the machine the lamp's doesn't even turn on and I get the error code.
I replaced the thermistor using the jigs, the TH1 isn't in...
I did reseted the DIPSW 03-1 from 1 to 0. But when I turn the machine off and on again i get the same error.
Just to give a feed back: I bought a chip reseter, and I successfuly reseted some chips, but it gave me only 2 to 3 thousand copies and then started to fail in quality.
So botton line, it's not...
Hello there folks,
I tried everything to fix this error. When I turn on the machine almost imediatly i get SC34-01. At the service manual it says: "TH1 (fixing temperature /1) detects more than...
I have some information now. I'll tried to do first the FREE solutions, and then the maintence kits thing (evean they cost arroung 300 US, or do you know some where I can find it cheaper?).
Thanks guys!
How do I chip a IU from Minolta C350?
First off all thanks for helping and sorry for the time that i took to answer. I cleaned the Gradation Sensor and the Black toner concentration sensor, and after that the machine works normaly but...
First off all thanks for helping and sorry that I took some time to answer. I already replaced the drum clean blade. The machine has 235.286 copies. By replacing the assembly you mean the...
I cleaned the sensor and the machine works normally, but after a few copies (arround 40 to 50) it gives this same error.
I followed the instructions in the Service Manual and did the auto...