Hi Can any body tell me were to find mono drivers for the color machines, C250,C252,C352,C451,C220,C253.
Thanks:)
Type: Posts; User: Karelkat
Hi Can any body tell me were to find mono drivers for the color machines, C250,C252,C352,C451,C220,C253.
Thanks:)
Hi have a Cm 2320fxi MFP. does not recieve fax on internale line on a siemens pabx.
Recieves from outside incomeing calls. machine is set to accept all ring types.
:)
Hi Looking for engine fw for C35 G108. Got a Code C13E2 After fw upgrade. The Machine had G108 fw on before upgrade. I would like to take it back to this virsion. Can any body help?
Hi can any body tell me were to find the 64bit drivers for Windows 7?
Thanks:)
HI Seltan
I'm from South Africa
FIFA 2010 houst.
If the sensor and guid plat did not solf problem.
Check fuser drive. there is a gear with a spring on it. spring some times start slips.
HI Stirton.M
I have noted that the staple unit moves on every copy, from the corner staple position to the two point staple position when staple mode is not selected.
Do you know of FW or a Soft...
Have you done a nvram reset?
If I understand your situation You have removed some boards and sent them to office and now they not working properly from 1 problem to bigger problem!
Just maybe...
Which firmware version are you refering to?
Hi I stand to be corrected but the models you mention need 256 MB CF Cards.
Hi! I don't think so! But the nic card plugs into the MFB board. I will try removing the cf card from mfb. restart machine with out cf card. Switch machine of refit cf card and try it.
rewrite cf...
Replace laser unit. We had brand new C652 do the same thing.
Hi if the FW does not help. unplug the df try scanning of the glass. I have had the Df causing simulear problems. Think it was the cable from df to machine.
Nv Ram reset will fix your problem. I have had to do this many times. Mostly caused from power supply problems from power company.
Thank the brass bushing seems to have done the trik.
soft switch 512 bit 7=0
Try soft swich 512 bit 7 0
Can some one maybe help with a noise on the staple unit.
Everytime you make a copy with or without selecting staple mode the machine makes a noise.
You can see that when the staple unit moves to...