The new touch panels is free of charge from ricoh beacause the old ones has a production failure with the glue or something..It's only the touch screen that has to ble replaced not the lcd screen...
Type: Posts; User: Leif
The new touch panels is free of charge from ricoh beacause the old ones has a production failure with the glue or something..It's only the touch screen that has to ble replaced not the lcd screen...
Press "c", press 1993 , press "c" 5 times to open the Self-Diagnostics menu.
There is not a password, only user name and leave password blank. username is admin or Admin (machine runs net bsd so its case sensetive)
Hi there, I had the same problem. Most likley the sr is out of "sync". As i can recall there is a gear inside in the fornt of the sr that is controlled by a solenoid. The gear it self is also on top...
it's very likely that your touch screen is broken. If you calibrate the screen and turn the machine off/on you will find that the screen is uncalibrated again..
well, then you have a flower stand :)
while waiting for spare parts you can lube the bearings in the fan with an oil pen so the customer can use the machine...This is a temporarily fix..
It's a small machine, with a pcu life time 45k and fuser lifetime 90k.
The RF id chip on the toner bottle contains information of remaining toner in bottle and bottle serial number. So if you re-use the chip the printer will say that the toner i empty or replace toner
Blank Copies
Possible Cause
• Poor drum sensitivity.
• Laser optic components are out of position.
• The proper bias voltages are not applied to the toner application roller and/or the...
How is the dev.roller? if its black after removing the deveolper you hav an faulty dev.roller..you can change the developer and clean the dev.roller and maybe the machine will be usable again or else...
I have an Spc820 where the customer want to print barcode and ocr font's from a citrix based program with pcl 6 universal printer driver (no bit map option). They also have an mpc2800 that have the...
be sure to use a card you know is working. We had big problems with new sd-card`s that caused the machine to go into sc when trying to update the firmware..
well that's possible, but the scanner does a white level calibration (agc) (calibrating ccd element so every pixel has the same output voltage) it is calibrated for every time you use the scanner. So...
hi again, I posted a replay but i seems like it's gone. Sp mode 78xx (don't remember) there is an menu to see all firmware. There you will find nib and scanner firmware. If you want to upgrade your...
well if it had been permanently i would say dirt in the optics, but this looks like an image processing issue. i would clear memory in scanner and checked hdd for bad sectors..
sorry, I'ment where you apply your network cable... (network interface card/ nib--> nettwork interface board)
Hi again, I have searched true my manuals and that system card can't be modified. I'ts protected so no one can tamper with it..I't like post script sd card, cant be copied/modified.If I have to...
Hi there, sorry too hear about your sd card failure. Have you tried to insert the card you are trying to copy from into your machine. I have just done the same here without any trouble. If you can't...