Old Guard’s 10 Rules for Field Service.
Here are 10 Rules that may help you through your time as Field Service Technicians.
Of course, I have ignored this, my own advice on many occassions, and...
Type: Posts; User: Old Guard
Old Guard’s 10 Rules for Field Service.
Here are 10 Rules that may help you through your time as Field Service Technicians.
Of course, I have ignored this, my own advice on many occassions, and...
Service Engineer Machine Communication
Chris, Stop watching this thread, it is not supported
More than 40 years. What a waste!
Good afternoon Debs N and others,
In the interests of accuracy and clarity:-
The fuse shown is not the correct one for this machine but from a "Zeus" machine.
The part number for the...
Sorry to inform you that SPC 431 has exactly the same problem and it happens on the MFD (MPC300/400) as well. It seems to happen more often when the usage patterns are intermittent such as schools...
Hi, I am very interested in acquiring this information. Just look at my e-Mail address = ruktechsupport@ricoh.co.uk. Thank you in advance. Old Guard
Even more good news for al you My-Ricoh lovers, the download site for Drivers is already being migrated to My-Ricoh. Enjoy!
Set SP 5618 to on to give you single colour options
There is no confusion at all I was just trying to put it in terms that may be help you understand just what you are quoting. The serial number is resident on both the Controller NVRAM and the BICU...
The EEPROM (NVRAM) on the BICU contains a lot more than you suggest. The serial number repeat for the BICU, machine settings + adjustment and this SC CODE condition are also registered in the file....
MPC4000 Faulty polygon mirror motors cause failure of BICU boards. There is a technical bulletin issued regarding this problem. Alternatively SC 204 can be caused by problems in the PTR area/ITB area...
I have visited a lot of machines with this error. NOTE :-The toner pipes are identical for all the colours on the SPC 430/431 but on the MFD (MPC 300/400) it has a specific pipe for each colour...
Hi, we have had a number of machines which show this fault when the the printer cable in plugged in (usually from new) or when large files are sent to the machine. All the firmware is at the very...
When training Ricoh colour products I always had a reliable saying to remember, generally "TWO GIG = TOO BIG!!!"
If you damage the socket in the machine (happens quite often) you can look forward to having to replace the whole drive unit, to which the sockets are connected. This would take about half a day!
These rollers have a habit of doing this after a certain lifespan, not just number of copies but hours of heating and cooling. That is one of the reasons why the Venus C2 (MPC 6000/7500) had to have...