Hi all. Got a problem with spc 430.sc670. Repaired controller and tested controller and engine board on another machine. No code. Checked connections. Everything fine.
Anybody got some advice?
Type: Posts; User: Leonh
Hi all. Got a problem with spc 430.sc670. Repaired controller and tested controller and engine board on another machine. No code. Checked connections. Everything fine.
Anybody got some advice?
Was back there today and no sc 400. Checked id sensors. They are clean.Color test chart look good.What i did yesterday is a force line pos.adj. & a process control with full music. I'm happy. It's...
Hi all. I am having a problem with an sc 400. What i have done is removed the itb and id sensors and cleaned them. I cleaned the motor in the front cover that move the id sensors and transfer roller....
Hi.Did u clean all the drum units(vacuumed).Polish the drums and use setting powder on the cl.blade.Umust clean the whole unit.Cl.blade usely gets a lot of toner on it and might cause ur use.
hi.what the manual says:
The laser synchronizing detection signal for the start position of the LDB [K] is not output for two seconds after LDB unit turns on while the polygon motor is
rotating...
What color?Check the pipes
have u tried to remove the shutter,the shutter only not the lever actuators.:mad:
Try www.ricoh-support.com for the latest drivers.
have u tried to calibrate the screen?
try this B223 9900 Hope it helps
have u tried the clutches on tray 1?Clutches are not part of the stations.