hello,
i want reset my mpc 2011 admin/supervisor password .
i have try on sp mode 5755
5755 [Display Setting] 001 Disp Administrator Password Change Scrn CTL
[- / - / -]
[EXECUTE]...
Type: Posts; User: Barış KURT
hello,
i want reset my mpc 2011 admin/supervisor password .
i have try on sp mode 5755
5755 [Display Setting] 001 Disp Administrator Password Change Scrn CTL
[- / - / -]
[EXECUTE]...
Hello,
i need help.
i want clear toshiba e243 PM alert.
how i can do this.
best regards.
Hello.
I have upgrading firmware taskalfa 4500i , but electric power shut down . process is broken.
After come back electric power . Machine is warming up , welcome logo displayed waiting 5...
file store km 4050 is not support.
is this macihe ?
28351
Hello
I am finding Taskalfa 3500i HD 2.5" sata2 , my HD is defective.
Can I use any Oem 2.5" HD ?
Best regards.
28345
when the power is up , main drive motor is running but all panel buttons are disabled.only energy led is on.
The machine don't make copy.
Hello ,
Kyocera task alfa 3500i machine show "white screen " and frozen when start up.
the "welcome" message does not show.how can I solve this.Any idea ?
best regards.
27987
I think "main charge error" on former machine (2530 3530 etc.)Replace charge corona (may be charge roller unit at 5500i) or drum unit.
check "lift motor"
replace the DP cable, it is broken.
I have running at MAC OS without PS3 module ,on MP C2551.
click here
macosx/macosx | The Linux Foundation
Set on MAC
1- pxlmono-1.9.dmg install
2- Foomatic-RIP 4.0.6 install
3-...
drum refresh or toner refresh ? , I couldn't find any setting about drum refresh in SM
but
U112 Setting toner refresh operation
Sets the toner refresh operation time and the developing bias on...
So , Our machine is Olivetti 253MF plus. (Fs 6525MFP ) .Every user can reach and edit "adress book" without admin password.
My customer does not want it.
hello ,
I want close fs6025 web interface (command center) ,because every user can reach over IP.
Or what can I do, only access my static IP ?
Regards.
Değerli arkadasim Turkce yazarsan kimse anlamiyor,ayrıca 0614'u paylaşmasan daha iyi olur.
please english.
It is like as km1635.And very good machine.
which models ?
it have caused OEM drum . i think ,it have does not discharge the drum surface after first copy.
OEM drums don't same as original drum.You have try sim U100 initial setting "132 or 135" .You set up...
switch interlock have caused c2000 ,
i think bad power source , ground line (low voltage etc.) , or short circuit on LSU cable line.
sorry, yes i have look service manual. I think Replace fuser thermostad.
10871087
u163 and clear
check it.
4 2BL22510 SPRING DRIVE CONT.
12 302GR31010 2GR31010 COUPLING G CONT
etc.
if you need postscript card over print Macisntosh.I have solved without PS card.
click this site and install software on Mac OS
...