Yes, I used the Test Chart and the Installation manual.
Type: Posts; User: finni72
Yes, I used the Test Chart and the Installation manual.
Thanx.
Yes, I have tried to adjust the hight on the left hinge.
Even when I try to adjust the scew max in both direction, it won't help any.
Hi!
I have some issues with the Bizhub C227.
The customer complaining about scew copies and scan from the document feeder.
I have tried the automatic feed adjustment, and adjusted the screw on...
I fixed the problem by putting a switch between the bizhub and the server.
The strange thing was that I could not communicate with the server even though I had set static IP with the correct subnet...
Thanx.
I will try it tomorrow.
Hi.
Is there a way to reset the network card without entering the webbrowser or entering administration?
The machine is a little fucked up. He cant find an ip adress and whwn entering...
Hi!
I have Bizhub C280 with black stains on the print and copies.
The stains comes from the black drum.
I changed the drum but new stain comes back on the new drum.
any idea what makes these...
Hi!
I Guess you need to change the Paddle holder assy.
The pin on the inside of the holder get broken so the paddle does'nt push back the paper to the right position.
On this old machine the C-0204 stands for Yellow PC drum charge Corona malfunction.
So i Guess the fault lies in the yellow drum unit.
Thanx for the answers.
It's good to know that others have the same problem.
I have problems With some Olivetti d-copia 3504MF (FS-1135MFP) machines.
I get a dark background and it looks like it comes from the drum unit.
When i changes the drum unit its back to normal...
It's possible that the MEA unit-gear supply is broken.
iT's on the main drive unit.
Just try to clean the transferroller with a dry cloth.
I guess it just dirty.
To enter servicemode, you have to enter 10871087 using the numeric keys.
U251 code is for resetting maintenance count.
I usually change the drum-unit when "Time for maintenance" is displayed.
Hi!
I guess thats a Taskalfa 300i.
Try to clean the chargeunit.
Hi!
I have had this problem on my Olivetti d-copia 500MF.
The problem was the charge unit.
There is an issue with the cleaning motor unit, so you don't manage to
intstall the charger right.
...
Thanx!
I have tried to do this but it didn't help.
Any other ideas?
Hi!
I have an C-35 that jam's in the tray all the time.
The machine has only taken 7600 prints.
I have tried to clean rollers and the clutch.
Have any of you had this problem, and is it at...
Hi!
I've had the same problem on a Olivetti d-color 500MF.
I think its the same machine as the km-5050.
When i upgraded the the firmware, i got blank copies.
The problem was that i really...
I had a simular problem with a Olivetti d-copia 18MF.
I tried to change all cards on the machine with an used machine i've had extra ,but it didn't work. In the en i had to use the old machine.
The...
I changed the sep roller torque limiter and it looks like that helped.
Thank u all for your help:)
It dosn't jam every time, but when it jams, the paper dosn't leave the tray.
I can copy 20 copies whitout stop sometimes and then i jams and i just have to open and close the machine.
Do you have...
Hi!
I have a problem with a aficio 3245c that's jams from tray 1.
I have tried to change the rollers and clutches i tray 1 without any luck.
Any ideas?
Best Regards
Finn Ivar
I had this problem whith an other type of mita kyocera machine.
The "copy tray" is full. Remove the copies and press start.
I hope it is the same problem.
Hello!
I guess that the Olivetti d-copia 283MF is the same machine.
Login: 2800
Password: 2800
Log inn on the web browser is: admin00
Its a little late, but i hope it helps
Best...