Yeah good one that, missing yellow would have been nice all along instead of all these misleading SC codes the little bastard ! II'll be storing that one in the memory banks.
Type: Posts; User: spaniel ears
Yeah good one that, missing yellow would have been nice all along instead of all these misleading SC codes the little bastard ! II'll be storing that one in the memory banks.
The offending wire. 27743
Yep, broken wire to the yellow on mine as well. Still printing in full colour, just got upset and threw up SC 620s, 101s and 120s when asked to do full colour copying. Customer said it did it...
Nice one. Looking at the samples he sent me plus your info, ITB is the bookie's favourite. Cheers
Just got off the phone to a lad I used to work with who now works at Ricoh, says he's had something similar. They'd swapped the DF and scanner section and still had the problem, turned out to be the...
No luck with the above. Asked the customer to try and keep an eye on things to establish exactly when the problem occurs. My own experience so far is colour copies through the DF throw up a 620 and...
Cheers, aappreciate that. sounds like I could have a stinker on my hands, D'oh! I'll let you know if I make any progress.
The customer said no problems on scans. I'll try those resets in the morning, cheers.
Got an MPC 4501 with a DF 3040 on. B/w copying seems fine through the DF but as soon as I select colour through the DF I get an SC620-01 in less than half a dozen copies usually. Also getting...
Update. Red stop button, 107, colour copy button (1 press, not hold down)
Anyone got the reset for this ? Can't find it anywhere in the manual, it just says enter engine mode. This is the op panel I've got on it.
Help ! Just to clarify, it's an SPC231sf, my edit of the...
Cheers, ordered. I'll check the fuser connector as well when I go back.
Am I right in thinking sc546 is thermistors, and if so has anyone got the part number for them as I don't have access to the manuals at the moment and need to order today. Cheers.
Update: The replacement hard drive I took out of a spare machine was also knackered. D'oh! Unable to try it beforehand because the machine I was robbing it from wasn't operational, but as far as I...
Only Sim 62 is missing by the look of things. I swapped the MFP control board complete directly from another machine.
I've got an E7-03 on an ARM620 (HDD trouble), Sim 62 seems to have vanished for some reason so I can't format the HDD or check operation. I've tried another HDD from one of our machines but still...
Did you ever resolve this problem? I've got a machine with the same intermittent fault at the moment.
Afternoon all. I'm trying to upload a JPEG scan of a problem i've got, it seems to be uploading very slowly and when it's finished there's an orange exclaimation mark next the the file size and when...
Cheers. I've not got any consumables to put in it at the moment, we'll order some in. Just cleaned the charge roller bearings, given the charge roller a good scrub and tightened up the contacts,...
My boss has just bought in an MP5000 from the trade, we're getting dark bands across the copies (see attatchments, apologies for the quality, taken on my blackberry)1190211903 varying amounts,...
Has anyone got a new set of fuser exit rollers for one of these, the ones on the shaft and the 3 idle rollers above it if possible. I'm also looking for an upper fuser roller as well if anyone has...
Thanks for the suggestions, i'll get on the case.
Thanks Mr Spock, i've formatted the HD as well, it seemed to improve things but the customer has since rang back saying it's still prone to freezing but not as bad as before.
Did that, got "SYSTEM MODE T371SYOE4006"
One of the best pranks we did was on my former boss many years ago. While he was working in the upstairs office one day, we stretched a piece of sellotape across the doorway at the bottom of the...