Got a machine dropping date and time, gonna change battery cant find part number, just your standard cmos battery?
Type: Posts; User: TONERINMYNOSE
Got a machine dropping date and time, gonna change battery cant find part number, just your standard cmos battery?
anyone got?
Machine does not power, have ac in, checked all three fuses on the power supply, led on ps upisnt lit, i dont know the measurements coming out, thinking i probably need power supply or they call it...
yes unfortunatly they dont buy them from us, they should ours are warranteed, but i guess they would rather pay 3 dollars less a cartriadge and $128 service calls every now and then, thanks for your...
loosen the screws on the drums master clamp, insert small pieces of paper underneth the plate and tighten screws, effectivly shimming the clamp gear up. open the clamshell and activate the 2 saftey...
what within the printer can cause this? what should i look for?
yes they are using generic toners, but they have been using the same brand on 4 of theese for 2 years, we got this error, they changed the cartriadge, error persists, i checked the contacts inside...
Interesting issue now it seems as though the solonoids are reversed in mode u243 when i run the "rev prs sol" which i imagine means pressure solonoid, the switchback solonoid operates (the lower and...
No they are generic, but they have been using this brand for years.
Hey guys have a 4250 that will ghost image the first page of a print job, after that its all kosher but the customer is climbing up my ass, i already tried a fresh cartridge and a new fuser, no dice,...
got a problem with one of these, when making a 2 to 2 through the dp, the second side shifts toward lead edge about 4 inches, duplex off glass is fine, i took apart the whole df looking for a popped...
Anyone have a good aftermarket source for fuser rollers on these, we have been gettin em from tsa but the press rollers keep getting flat spots early, any ideas?
Hey guys i have one of these machines int he field that is shifting the second side image about 4 inches toward lead edge when copying duplex through the dp, it does not jam and will run a whole...
Yea thats what i was thinking, i guess that would be on the recovery disc?
i have a cutomer who is faxing from their machine into the computer as a backwards way of scanning, i am trying to upgrade him to a 255 with scan to rectify this issue, but int he meantime he will be...
thanks guys i figure it was some sort of read pattern, ill try messing with the cleaning unit
This pattern is not in the print data, it gets cleaned off after the first copy, its as if the machine just decides that this pattern is part of the image, but only for the first copy, like there is...
Both prints and copies
I have this issue on the first copy intermittently, i have no idea help!
Found it sp 6134
thanks!
No there are wires that were clipped from misuse in the harness
How do you adjust this? The staple is about 1/8" off of the spine, dont see anything in the manual
Does anyone have the point to point? Im looking for the harness that supplies dc to the door/transfer assembly, looks like it runs into another connector join in the rear near the drive section, then...
I agree here, i have flipped meters, but that was on rebuilds and i clearly disclosed to my customer that i was doing it.
ANYBODY GOT?