Search:

I have a C308 with a IC-416 that keeps saying cannot connect to the controller, the fiery tile goes grey until the fiery is turned off and back on. The printer also has PaperCut MF on it. I recently...

Hi,

We have a customer with a C6000L that keeps having a C-0101 error. The printer warms up and can run the adjustments (gamma adj, transfer belt & toner refresh, etc) fine. It only errors when...

Ok thanks, I'll bear that in mind if it comes back in. Maybe I'll change the yellow dev first

Yes all genuine original toners and drums

I have a Canon IR C5235 in a customer of ours and they have a colour/quality problem. The colours tend to be very poor and rather yellow-ish, like a yellow/bright tinge to everything. I run the auto...

Any UK based suppliers? Or any engineers that may wish to sell the parts....

Hi, I was wondering if anyone knew where I could get some Canon ADF parts from.

The 3 part numbers are:- Roller, Pickup FC9-4968-000; Roller, Paper Sep FC6-2784-000; Pad, Seperation FL3-5538-010...

I don't think the current Data Administrator works with the new C368 series

I have now solved the issue...turns out it was a protocol on the copier that the router didn't like. I turned a few off but I think the issue was the SSDP setting. Now working fine 👍🏻

Must admit I haven't replaced the motor yet, was going to next.

I took a basic tp link wireless router with me and it worked fine. Their network can't see it on DHCP or a static IP. Someone mentioned to me about changing the network speed on the router...is that...

I have installed 2 bizhub C227's to a couple of estate agents, both machines can't be seen by their networks. If you put the copiers on DHCP they freeze and get E301 or E303 codes (memory related...

We have a C6000L with a LU202 on it, it's done just over 1mil. We keep getting a 1501 jam from the LU, most of the time it seems to not pickup the paper. I've changed the pickup & feed roller, the...

I have a C1060L with a IC-415 embedded fiery attached. Lately, on the printer itself, the controller page freezes and doesn't allow any contact. Command workstation on the PC works fine, even when...

We have a Canon IR C5235i, to start with the colour registration (mostly magenta) was way out of position compared to the other colours on occassional prints. Then the other colours started to go out...

I'm having same problem with a C6000L, however my paper isn't folding, but the timing of the image is out (image not on page correctly)

Having the same problem as most of you, I don't have the mosel_256_01.plt file. Could someone please e-mail it to john@arccolourcopiers.com

Thanks