Search:

Thank you so much ! this was the fan not spinning up, and I got in on order !!

much appreciated !!

do you know the part number for that fan ?

Greetings,

I have a Sharp MX 5001, It has a error code L4-45 fan motor error, I have replaced the Fan on the back of the Copier but still get the Code, the manual talks about fans 1 & 2, but I...

Thank you, that helped me !!

Greetings,

How do you enter service mode for a Sharp MX 5001 ? , I replaced some drums and need to reset the TA message.

our company normally does not service sharp, but the Boss handed me...

Greetings,

I have a Ricoh MPC4501 that keeps giving a SC-991, I have already replaced the entire Print controller from another unit, but still get this error, I have loaded the current Firmware...

Greetings,

I am looking for the information regarding the Drum Mods for the Ricoh MP C4501, can the drums be modified like in the MP C4500 ect..?
can anyone provide a link or possibly the part...

Print heads

Looking for "print & scan option, this is for a home use copier, it still has some life on the components, Drum, Fuser, ect.. but I was hoping to use it to print and scan if anybody has one cheap...

Good Morning Folks,

I am working on a Xerox Workcentre 7335, I has "4" blinking lights on the control panel "services"/"job status"/"machine status" and the "Interupt" are all flashing, and...

Greetngs,

I have a client informing they cannot log in as admin on the web interface to add/edit and delete users.

I dont do alot of the connectivity,( enough to be dangerous you could say)...

I had this same problem, replaced the same things, and it ran with a known working toner but still jammed.....it was a "drum drive motor"....the used toner was stirred and worn enough that what threw...

Greetings fellow technicians,

Having Problems with the service station on "boot" up tbe carriage drives to the left as normal, and the service station starts up to "home" but the service station...

when you say "Not Run" can you be more specific? is the Copier jamming, or the Display informing you anything regarding specification(s)?


FYI : as a new member you may want to consider providing...

I have purchased several Items from Paul@justmanuals.com and would recommend.

I have had to do this on various Ricoh models in the past even "hard wired" and it took care of that same symptom/problem.

Greetings everyone,

I wanted to ask for some referals for a good (price/shipping/selection/stock/ ect...) Canon parts supplier(s), for both new and older Canon Copiers/fax/ect... I would greatly...

I do not know the procedure, perhaps a forum for auto repair would better serve for the assistance you seek.
I am also not in the market for a vehicle at this time.

thank you.

I tried this, but it did not reset the page count, or the other total counters for print,copy,fax.
still looking for procedure, any helpwould be greatly appriciated.
thank you very much.a

Very true, I rebuild the DR400 and use compatable toners, and it works very well.

Greetings everyone,
I have a brother MFC 8460, I have done a refurb on it, drum, fuser, LSU, PF, and HAVE reset all the counters for these items, But I want to reset the MAIN Total page counter...

Thank you very much. that took care of it.
problem solved !!

Greetings all,
I have a Ricoh aficio 9001, I did the PM on the copier and reset the PM counts in User tools, But The message still says replace cleaning web on main copy screen, Is there a reset in...

Thank you very much, swapped fan from another machine and the problem has been resolved !!!

Greetings All,

I have a Ricoh Aficio 2060 with a SC-490 code, The Operation panel message prompts to turn off/on to reset code but the wrench coninues to come back and the code does not clear....