Problem Solved,
Printing issue was caused by usb to parallel cable converter after using computer now its okey
Type: Posts; User: samsogoye
Problem Solved,
Printing issue was caused by usb to parallel cable converter after using computer now its okey
Thanks letme try to install
Dear Tech member,
I need you help, I have been struggling to install the Printer on my laptop without success for one week now,
my machine is Nashuatec 1805 d and printer control board is 1018...
Thanks all for your contribution, regards my problem, let me apply this technics
Thanks service manual 4u
Please I need your help how can I solve this problem,
Thankyou let me start by mechanical counter..then BICU.
its DSM 618
Someone to help me please.
I need your help please, When I turn on the machine within two second it bring function problem error no: 901 so It does not rotate any thing(initialize the system)
I need you help.
Sam From...
Currently the drum is in phase 1>2 , Do I suppose to change phase? and when I suppose to change phase?
Herrmann thanks for help,
Poa kaka
Try to check heat sensor if it has good contact.
Am not sure because It has passed to more than 4 tech here in Mwanza, so am not sure if it has been adjasted, You can give me a tips to know if it has been adjasted.
I think those connection they are located at the light side in front. if its that their okey.
Any information regurds to this quote here:
15.3.2.3.7 Extreme fogging due to poor connection of LED array for pre-conditioning unit/Occasional E061-0003 Error Code
0009-9283
iR C6800
[...
Hello my brothers I have got a new service manual From tectat and I have found the following information:
15.3.2.3.7 Extreme fogging due to poor connection of LED array for pre-conditioning...
Okey thanks Teckat
Its about 216,800 copies it has never replaced,
Yes I know how to remove it I use its service manual because it is my first time to deal with this big machine, before I was manage to fix replace yellow cartridge issue so now I have the code error...
Not after 2/3 sec after turn on. When I turn on machine start to warm up when finish it start to enter into gradation process when it is in that process it start to rotate the whole mechanism I...
Click on printer setting button the specify the printer to be used on your scanner and save changes
okey Herman
Screw thanks let me find the corona